View source for Benderlink Current Loop 4 Port - Measuring Center Side

[[image:Blink_currentloop_module_logo_800.jpg|400px]]

[[image:Currentloop_4port_ms_box2.jpg|400px]]
<br><br>
__TOC__



==Description==
This is a four port module that was designed for connecting a Benderlink computer or measuring center computer up to four Eaton Leonard benders.
<br><br>

==Productivity Benefits==


See [[Benderlink Current Loop Module]] page for a list of productivity benefits

==Installation Location==
This module is typically placed near the Benderlink computer which acts as the measuring center side of the connection.  The module can also be attached to any measuring center using Supravision software.

==About the Connections==

* FOUR RJ-45 ports - This allows for use of standard ethernet cable converted to serial using RJ-45 to DB9 converters (supplied with the module)<br><br>
* FOUR Military Connectors - These connectors follow the legacy Eaton Leonard style connection.  You can connect standard communications cable with circular connectors at either end.
<br>


==Inside the Module==

This is an image of the inside of the module.  It contains four of our current loop boards, one power supply, and all cabling.

[[image:Currentloop_4port_ms_box_inside2.jpg|250px]]

==Example Installation==
<br>
This is an image of the box installed under the work-bench with a Romer arm and computer system.<br>
<br>
[[image:Currrentloop_4port_ms_box_installed2.jpg|300px]]

==Purchasing==
<BR>
This item can be purchased from our [http://advanced-tubular-technologies.stores.yahoo.net/beculomo4po.html Online Store]

==Other Pages==

*[[Benderlink Current Loop Module]] page
*[[Benderlink]] page
*Read more about the current loop board here: [[Communications Board for Eaton Leonard - CB-EL1]]