Difference between revisions of "CNC Bender v15.14.1"

From ATTWiki
Jump to: navigation, search
(Created page with "<table> <tr> <td width=400> ===v15.10.1 - February 24, 2018=== *Back to CNC Bender Software Updates </td> <td width=300> 300px<br> </td> <...")
 
 
(9 intermediate revisions by one user not shown)
Line 2: Line 2:
 
<tr>
 
<tr>
 
<td width=400>
 
<td width=400>
−
===v15.10.1 - February 24, 2018===
+
===v15.14.1 - February 24, 2018===
 
*Back to [[CNC Bender Software Updates]]
 
*Back to [[CNC Bender Software Updates]]
 
</td>
 
</td>
Line 15: Line 15:
 
__NOTOC__
 
__NOTOC__
  
−
==[[image:Check.jpg|25px]]NEW: POST-BENDING FEED ACTION AFTER BEND ARM==
+
==[[image:Check.jpg|25px]]NEW: ADD MORE in BENDERLINK==
−
This was added to allow the Feed to move to the load position immediately after the bend arm returns in the RELEASE section. This is for customers that require the chuck to be closed on a new part in the RELEASE section - and want the Feed axis to be in the LOAD position before starting the next part logic.
+
Some customers like to add more bend angle to the bends during correction to allow for long-term material springback.<br><br>
 +
With this new feature, you can add a value to all the fields in three axes. You can add data to the Adjustment fields or the Nominal fields.
 +
<br><br>
 +
[[image:CNC Benderlink Add More.png|800px]]
 
<br><br>
 
<br><br>
  
−
==[[image:Check.jpg|25px]]NEW: ADD MORE in BENDERLINK==
+
==[[image:Check.jpg|25px]]NEW: POST-BENDING FEED ACTION AFTER BEND ARM==
−
Some customers like to add more bend angle to the bends during correction to allow for long-term material springback. You can add a value to any of the three axes. You can add data to the Adjustment fields or the Nominal fields.
+
This was added to allow the Feed to move to the load position immediately after the bend arm returns in the RELEASE section. This is for customers that require the chuck to be closed on a new part in the RELEASE section - and want the Feed axis to be in the LOAD position before exiting the RELEASE logic.
 
<br><br>
 
<br><br>
  
−
==[[image:Check.jpg|25px]]FIX: I2T Module==
+
==[[image:Check.jpg|25px]]FIXES: I2T Module==
−
Many of the enhancements in version 15 were meant for the Galil control.  This version fine tuned some of the changes for the legacy I2T module-based control.<br><br>
+
Many of the enhancements in version 15 were meant for the Galil control.  This version fine-tunes the same changes for the legacy I2T module-based control.<br><br>
  
 
==Other Pages==
 
==Other Pages==

Latest revision as of 19:12, 24 March 2018

v15.14.1 - February 24, 2018

Cncbender v15 logo.png


Check.jpgNEW: ADD MORE in BENDERLINK

Some customers like to add more bend angle to the bends during correction to allow for long-term material springback.

With this new feature, you can add a value to all the fields in three axes. You can add data to the Adjustment fields or the Nominal fields.

CNC Benderlink Add More.png

Check.jpgNEW: POST-BENDING FEED ACTION AFTER BEND ARM

This was added to allow the Feed to move to the load position immediately after the bend arm returns in the RELEASE section. This is for customers that require the chuck to be closed on a new part in the RELEASE section - and want the Feed axis to be in the LOAD position before exiting the RELEASE logic.

Check.jpgFIXES: I2T Module

Many of the enhancements in version 15 were meant for the Galil control. This version fine-tunes the same changes for the legacy I2T module-based control.

Other Pages

Retrieved from "http://www.advancedtubular.wiki/index.php?title=CNC_Bender_v15.14.1&oldid=37123"