Difference between revisions of "VTube-LASER"

Revision as of 13:29, 4 March 2011

Connect to a FARO ScanArm and measure tube shapes.

March 04, 2011	VTube-LASER v1.61	New end labels identify the ends of the tube and automatic diameter handling fixes
February 21, 2011	VTube-LASER v1.6	Important end-scan outlier point detection and prevention, continuous tactile scan, faster redraws, improved user interface
February 7, 2011	VTube-LASER v1.59	Ball probe measurements and laser measurements now work properly together in the same tube measure.
January 18, 2011	VTube-LASER v1.58	New "Construct Tube" feature that allows users to route a tube in 3D space by pointing the arm, increase or decrease points and straights on the fly when measuring tubes
January 13, 2011	VTube-LASER v1.57	Supravision Import, faster alignment, improved Bender Setup, many other changes
January 6, 2011	VTube-LASER v1.56	New springback compensation variables, new items in the inspection report - like the new XYZ deviation report, bender data setup menu enhanced, invert rotation feature
January 3, 2011	VTube-LASER v1.55	New enhanced radius measurement

December 25, 2010

New DRO (digital readout), realtime intersection points, other enhancements

VTube-LASER Training Video - How to perform effective end scans.
VTube-LASER and FARO - Reverse Engineering a Tube - v1.57 VTube-LASER 1.53 Reverse Engineering SPEED TEST Video Vtube-LASER 1.57 - Recall MASTER Bender Data from Benders
VTube-LASER Training Video - How to start a new 1/4" tube project and enter master data.
VTube-LASER Training Video - How to measure the 1/4" tube and compare it to master data.

@@ Line 19: / Line 19: @@
 <table cellpadding="5" width="700">
+<tr>
+<td width="150">March 04, 2011</td>
+<td width="200">[[VTube-LASER v1.61]]</td>
+<td width="200">New end labels identify the ends of the tube and automatic diameter handling fixes</td>
+<td>[[image:Vtube-laser_1_61.jpg|150px]]</td>
+</tr>
 <tr>