Difference between revisions of "VTube-LASER v1.75"
| Line 15: | Line 15: | ||
__TOC__ | __TOC__ | ||
| − | ===[[image:Check.jpg|25px]] | + | ===[[image:Check.jpg|25px]] CRITICAL ENHANCEMENT: Split Bend Logic and Display=== |
<table cellpadding=10> | <table cellpadding=10> | ||
Revision as of 21:04, 27 January 2012
|
Revision 1.75Back to VTube-LASER |
|
Contents |
CRITICAL ENHANCEMENT: Split Bend Logic and Display
|
After extensive Gage R&R tests, the Split Bend logic is completely rewritten and is more accurate and robust than the original logic.
|
|
ENHANCED: Scanner Setup Saved with Project File
|
This version addresses issues with the new Scanner Setup in v1.74. |
NEW: Separate Cylinder Fit Tolerances for LONG and SHORT Cylinders
|
VTube now has a second set of tolerances for shorter straights. This allows for looser tolerances on shorter straights without producing an error message.
|
|
NEW: Cylinder Fit Radius Deviation Check
|
VTube now checks to be sure that all point clouds used in the diameter calculation all fall within a reasonable tolerance for distance from the calculated centerline.
|
|
ENHANCED: End Scan Qualification Logic
|
The end scan qualification logic was improved to work more often.
The end scans can now be inside the cylinder scans.
|
Other Changes
Other Pages
- Back to VTube-LASER
