Difference between revisions of "VTube-STEP v2"

From ATTWiki
Jump to: navigation, search
(→‎25px NEW: Springback Compensation Switch in Alpine M4 Export Menu)
(→‎25px FIXED: Ball Probe Issues)
Line 38: Line 38:
 
</table>
 
</table>
  
−
===[[image:Check.jpg|25px]] FIXED: Ball Probe Issues===
+
===[[image:Check.jpg|25px]] FIXED: Ball Probe Issue===
 
<table cellpadding=10>
 
<table cellpadding=10>
 
<tr valign=top>
 
<tr valign=top>

Revision as of 22:14, 16 February 2015

Vtube-step logo.jpg

Revision 2.0

Vtube-step-1.87 screenimage.png





Check.jpg NEW: Path Manager

This change to VTube is a huge time-saver. Customers that have tested this feature report that they are very happy it.

The new Path Manager allows you to store and recall complex file paths from VTube without having to constantly drill down into folders and paths.

Vtube-step-2 screenimage closeup 2.png

Check.jpg FIXED: Ball Probe Issue

We fixed a ball probe measurement issue where VTube would sometimes not always seem to take in the single points from the FARO driver.

This issue created problems with measuring cut planes too. If you measured cut planes, and still couldn't get the cut plane to work properly, then it was probably due to this issue.

Check.jpg NEW: Springback Compensation Switch in CSM M4 Export Menu

The CSM M4 Export menu now includes a Springback Compensation switch to enable or disable compensation.

For springback compensation to be effective, it is necessary to have values other than 0 in the proportional and fixed springback fields in the Part Setup menu.

Vtube-step-1.99 csmexport springback option.png

Other

Retrieved from "http://www.advancedtubular.wiki/index.php?title=VTube-STEP_v2&oldid=26405"