This page describes the use of the VTube-LASER to OMCG bender corrections.

We worked with OMCG to add the Supravision Network protocol to their bender control software. This protocol is embedded in VTube-LASER.

They released version 2.02 in early 2019 with this new communications / corrections capability.

Click on the Measuring System button in the toolbar to load the Measure System Interface.

The window allows you to handle both CORRECTIONS and NOMINAL data.

NOMINAL EXPORT

• The NOMINAL EXPORT section allows you to SEND NOMINAL data FROM the OMCG software to VTube-LASER.
  
  
• The NOMINAL EXPORT Enable allows OMCG to automatically respond to a request for NOMINAL data from VTube-LASER.
  
  

NOMINAL IMPORT

• The NOMINAL IMPORT section allows you to IMPORT VTube-LASER data INTO the OMCG.
• In this case, you can load any Supravision file created by VTube-STEP or VTube-LASER into the OMCG control.

CORRECTIONS

• You can set a variety of options to control how you want the data to come into the OMCG control.
• Recommended settings:

1. Enable corrections
2. Set Apply Mode to "Ask" in order to confirm that you will allow the corrections to be applied.
3. Apply the corrections to any of the three options. (Use the checkboxes.)