Difference between revisions of "VTube-LASER v1.75"

From ATTWiki
Jump to: navigation, search
(→‎25px Other Changes)
(→‎25px ENHANCED: Scanner Setup Saved with Project File)
Line 38: Line 38:
 
</td>
 
</td>
 
<td width=300>
 
<td width=300>
 +
[[image:ScannerControlValues.jpg|300px]]
 
</td>
 
</td>
 
</tr>  
 
</tr>  

Revision as of 21:08, 27 January 2012

Vtube-laser logo.jpg

Revision 1.75

Back to VTube-LASER
Back to VTube-STEP

Vtube-laser 1 73.jpg

Contents


Check.jpg CRITICAL ENHANCEMENT: Split Bend Logic and Display

After extensive Gage R&R tests, the Split Bend logic is completely rewritten and is more accurate and robust than the original logic.

A new Split Bend plane object shows the plane were the split is being performed. (See the orange planes in the image on the right.)

VTube-LASER Split Bend v1.75.jpg

Check.jpg ENHANCED: Scanner Setup Saved with Project File

This version addresses issues with the new Scanner Setup in v1.74.

ScannerControlValues.jpg

Check.jpg NEW: Separate Cylinder Fit Tolerances for LONG and SHORT Cylinders

VTube now has a second set of tolerances for shorter straights. This allows for looser tolerances on shorter straights without producing an error message.

LongAndShortCylinderFitSetup.jpg


Check.jpg NEW: Cylinder Fit Radius Deviation Check

VTube now checks to be sure that all point clouds used in the diameter calculation all fall within a reasonable tolerance for distance from the calculated centerline.

CylindefFitRadiusDeviationCheck.jpg


Check.jpg Other Changes

  • A new tolerance is added for surface point diameter check.

Other Pages

Retrieved from "http://www.advancedtubular.wiki/index.php?title=VTube-LASER_v1.75&oldid=17398"