Difference between revisions of "Change the VTube User Interface Language"

Revision as of 00:33, 30 October 2012

Change Method 1 - Run a Language Installation Program

You can change the VTube user interface file by running a language setup file.

Step 1 - Close VTube

Step 2 - Download the Language Installation Program

Download the language installation file at the VTube-LASER or VTube-STEP support site:

Step 3 - Run VTube

Change Method 2 - Manually Select a New VTL File

The first method of changing the interface is to select a new VTube Language (VTL) file from inside the System Options following these steps:

Step 1 - System Options

Enter System Options and press the Choose New Language button in Language Setup:

Step 2 - Choose a new Language File

Choose a new language file from the VTL files listed:

Step 3 - Press OK

Press OK in the dialog:

Step 4 - Close the System Options

Step 5 - Close VTube

Step 6 - Reopen VTube

Step 2 - Enter System Options

Press the System Options button in the toolbar.

Step 3 - Enter System Options

Press the Math Setup tab, then the Decimal tab.

Step 4 - Change the Decimal Setup

Press the Math Setup tab, then the Decimal tab.

Step 5 - Switch to the Project Setup Tab

Change to the project setup tab and press the Set Project Default button the new default for clearing VTube.

Setup Complete

Now, whenever VTube is cleared for a new project, the new decimal places setup will take effect.

Other

• Back to VTube-LASER
• Back to VTube-PRO
• Back to VTube-STEP
• See the VTube Software Maintenance Plan page