Difference between revisions of "VTube-LASER v1.81.4"

Revision as of 19:45, 25 March 2013

The new graphic point labels display on the tube model.
They show the end labels and the intersection point labels in balloons that surround the part.
The graphics labels are now included in reports.
The label fonts can be controlled in the new Parametric Tube control window.

Select a datum point in the datum grid with the new point selector by clicking on the Datum grid.
The datum is used for reporting distances from the datum to other points when the part is aligned to the master.

The Bender Setup menu uses a new collapsible-style office menu on the right side for extra room for new commands.
Bender Setup can now send Blue Column data to the bender + FULL springback compensation for first-time setup.

VTube now stores the orientation of the tube model in the viewport in the project file.
Supravision bender output did not include the last radius value in the Supravision file. This is repaired.
Multiple presses of the "Copy Master LRA" button in the Bender Setup menu no longer increases the blue column data be the adjustment data.
When saving output to the Winton ECNC4 format, the filename is now automatically set to the current part name.
When creating a PDF file, the word "VTube-" is no longer inserted at the beginning of the filename. The filename is made up of the part number alone (appended with PDF).
The "Custom" point setting is no longer allowed in the Point Alignment Selection window, since the alignment points must be based on points along the MASTER and MEASURED centerline points along the tube.

@@ Line 67: / Line 67: @@
 <td width=400>
-[[image:vtube-laser-1.81.4.datumgrid.jpg|400px]]
+[[image:vtube-laser-1.81.4.datumgrid.jpg|400px]]<br>
+[[image:vtube-laser-1.81.4.datumgrid_closeup.jpg|400px]]
 * Select a datum point in the datum grid with the new point selector by clicking on the Datum grid.<br><br>