Difference between revisions of "VTube-LASER v1.81.4"

Revision 1.81.4

• Back to VTube-STEP
• Back to VTube Software Updates (for LASER Mode)
• Back to VTube-LASER

• The new graphic point labels display on the tube model.
  
  
• They show the end labels and the intersection point labels in balloons that surround the part.
  
  
• The graphics labels are now included in reports.
  
  
• The label fonts can be controlled in the new Parametric Tube control window.

• Right click to copy the current image to the Windows clipboard.
  
  
• Paste the bitmap into any Windows program that can accept bitmap images.
  
  

• Select a datum point in the datum grid with the new point selector by clicking on the Datum grid.
  
  
• The datum is used for reporting distances from the selected datum to other points when the part is aligned to the master.
  
  

• The Parametric Tube controls are removed from the Entity window and placed in a new Parametric Tube control window.
  
  
• New controls were added: model smoothness, point label font control, point scale
  
  

• This feature grid editing to be locked or unlocked.
  
  
• Locking the grid allows you to select multiple cells for copying the data to clipboard, or pasting data into the grids from the clipboard.
  
  

• This is a small green arrow above the XYZ grids that allows you to use the previous value by clicking on the green down-arrow.
  
  
• When there is no possible need for the previous value, the green arrow disables like this:
  

• New popup-menu controls allow you to copy grid values to the clipboard.
  
  
• You can copy in standard tab separated data, or in HTML format.
  
  
• Sample HTML paste from clipboard of demo part 2:

• Data that is pasted into VTube should be tab-delimited (values separated by tab characters)

• The Bender Setup menu uses a new collapsible-style office menu on the right side for extra room for new commands.
  
  
• Bender Setup can now send Blue Column data to the bender + FULL springback compensation for first-time setup.
  
  

• VTube now stores the orientation of the tube model in the viewport in the project file.
  
  
• Supravision bender output did not include the last radius value in the Supravision file. This is repaired.
  
  
• Multiple presses of the "Copy Master LRA" button in the Bender Setup menu no longer increases the blue column data be the adjustment data.
  
  
• When saving output to the Winton ECNC4 format, the filename is now automatically set to the current part name.
  
  
• When creating a PDF file, the word "VTube-" is no longer inserted at the beginning of the filename. The filename is made up of the part number alone (appended with PDF).
  
  
• The "Custom" point setting is no longer allowed in the Point Alignment Selection window, since alignment points must be based on points along the centerline points on the tubes.