Revision 2.8.5

Original Release Date: July 25, 2017
Latest Build: 1

• Back to VTube-LASER
• Back to VTube-LASER Updates
• See also VTube-STEP Updates
• Download in updates the VTube-LASER Support Page

This feature allows for the import of older VTube-LASER project files without loading any of the measuring center setup values.

In previous versions, when performing REVERSE CALC from bender data to centerline XYZ data, VTube-LASER could not keep the previous part orientation in 3D space when the first leg ran parallel to the Z axis.

The part data on the right shows the first leg moving positive only in the Z axis. This is an example of data that could not be handled during reverse calculation.

The math engine has been improved to handle this condition.

Previous versions of VTube could only display DATUM reports with MEASURED-ALIGNED to MEASURED-ALIGNED DATUM or MASTER to MASTER DATUM values.

Now VTube-LASER can show DATUM reports with MEASURED-ALIGNED distances to MASTER Datums.



To use these new report templates:

1. Download these two new templates: Zip file of Measured to Master Datum Report Templates.
2. Extract them to a folder location that you can find.
3. Load VTube-LASER.
4. Go to Reports.
5. Click on the Templates tab.
6. Click on Import.
7. Find and click on the new Datum templates.
8. Repeat at step 5 for the second template file.

We've improved the REPORT window's ability to come to the top of the current window.

The German translation for VTube-LASER is updated and included in the installation.

The translation is in the file german_v2.8.4_build3.xls.

The Japanese translation for VTube-LASER is updated and included in the installation.

The translation is in the file japanese_v2.8.4_build3.xls.

The French translation for VTube-LASER is updated and included in the installation.

The translation is in the file french_v2.8.4_build3.xls.

Our German translator helped us correct several problems with the English in the VTube user interface.