Measure Large Diameter Tubing

How to measure large diameter tube and pipe in VTube-LASER Back to VTube-LASER

Instruction for Large Diameter Measures

VTube is immune to diameter sizes if you follow the wide-scan technique to measure larger diameters. If a diameter surface stripe does not cover enough angular distance, then the math engine loses accuracy in calculating the centerline of a straight. For diameters 6" and greater, you can switch to the wide-scan technique. On larger diameters, it is important to scan in points from a wider area of the tube. First scan one end in the normal way. Second - move to the other end, and rotate the probe around the tube slightly. We recommend about 90 degrees of rotation. Then scan the new end and new side of the cylinder.

Other Pages

• Back to VTube-LASER