VTube-LASER FARO Arm Riser
From ATTWiki
|
|
|
|
Arm risers make tube measuring easier by lifting the arm higher over the tube shape. The effect is to make the arm feel lighter. It also gives better clearance for moving over the tube. The riser shown in this image was first shown at the FABTECH 2016 trade show. Two of these risers have been tested for several months (in our office and at AutoJet-Muffler. Based on our experience, we strongly recommend that you use a riser like this to give you better clearance when approaching the tube for scanning. Purchase this riser in our store here: ARM RISER in Advanced Tubular Store. |
|
Other Pages
- Back to the VTube-LASER page
