VTube-LASER v2.9.19
From ATTWiki
|
Revision 2.9.19Release Date: April 3, 2019
|
|
NEW - Compatible with Baces USB Arm
|
VTube-LASER can now connect to and control a Baces USB arm. |
|
NEW - VTube-STEP Mode Alpine M4 and CSM M4 export filenames can use more than 20 characters.
|
VTube-LASER would not allow VTube-STEP to export an MBF filename with more than 20 characters. Alpine and CSM have changed this limitation for the characters in the filename, so we have changed it in VTube-STEP as well. |
|
FIX- Important Corrections Loop Fix for the COMCO Protocol.
|
VTube-LASER would only make the first correction properly using the COMCO protocol. Second corrections were incorrect because of the way VTube handled the correction data column of the COMCO data. This has been fixed in this version. |
|
NEW - Renamed for clarity: The configuration setup list in the Measure 1 menu in System Options is now called "Tolerance Configuration Profile List"
|
The setup list for configuration for Measure 1 inside System Options had an ambiguous name that led to confusion. We renamed it to make its purpose more clear. |
|
Other Changes
- The Configuration Profile List will no longer be overwritten when installing new versions of VTube-LASER.
Other Pages
- See VTube-LASER Addata ZModem Communications Protocol for more information.
- Back to VTube-LASER
- Back to VTube Software Updates (for LASER Mode)
- See also VTube-STEP
- See also VTube-STEP Revisions
- See VTube-LASER Customer Support Page to download the latest version.
- See the tutorial on DCF - Dual Cylinder Fit
- See the tutorial on DCP - Diameter Cut Planes
- See VTube-LASER Cut Planes
- See How to Measure Tubes Attached to an Evaporator with the DCP Feature
