VTube-LASER v1.75

Revision 1.75 Back to VTube-LASER Back to VTube-STEP

ENHANCED: Split Bend Logic and Display

After extensive Gage R&R tests, the Split Bend logic is completely rewritten and is more accurate and robust than the original logic. A new Split Bend plane object shows the plane were the split is being performed. (See the orange planes in the image on the right.)

ENHANCED: Scanner Setup Saved with Project File

This version addresses issues with the new Scanner Setup in v1.74.

NEW: Separate Cylinder Fit Tolerances for LONG and SHORT Cylinders

VTube now has a second set of tolerances for shorter straights. This allows for looser tolerances on shorter straights without producing an error message.

NEW: Cylinder Fit Radius Deviation Check

VTube now checks to be sure that all point clouds used in the diameter calculation all fall within a reasonable tolerance for distance from the calculated centerline.

ENHANCED: End Scan Qualification Logic

The end scan qualification logic was improved to work more often. The end scans can now be inside the cylinder scans.

Other Pages

• Back to VTube-LASER