VTube-STEP v1.59
From ATTWiki
|
Revision 1.59
|
|
ENHANCED - Added Automatic Support for 180 Degree Bends
|
There is no single intersection point for 180 degree bends - so they require special handling by automatically splitting the bend into two sequential bends. The image on the right shows two parallel straights that form a 180 degree bend. The built-in logic handles the creation of the two intersection points and splitting of the bend into two 90 degree bends with a zero straight. |
|
FIX - Straights with Length of Zero Handling
|
VTube now no longer tries to forms straights with a practical length of zero. They are omitted from the solid model created. |
Other Pages
- Back to the VTube page
