VTube-STEP v1.80

Revision 1.80 Back to VTube-STEP Back to VTube-STEP Revisions Back to VTube-LASER

• See VTube-STEP Customer Support Page to download the latest version.

Transfer Tubes to CAM2 Measure 10

• Enter the tube data in VTube then save CAM2 Measure 10 tube data for import into CAM2.
• Save using a Popup menu in the XYZ grid, or save from the the File tab.

Added Split Bend collection feature in Collect Control in STEP mode

• Split bend (for handling 180 degree bends or greater) was available in LASER mode - now it is available in STEP mode too.
• This means that you can also display compress LRA data with two 90s being combined to show a 180 degree bend in the LRA grid and the reports.
• In STEP mode, you can select an arc section that* becomes the guide for the intrados and extrados - showing VTube where to form the split bend centerline.
• The split construction model now displays in STEP mode.
  

Added new Radius Table in XYZ pop-up grid for storage of often-used radii

• Store commonly used radii in a table for use in the future.
• Any number can be added to the list.
• VTube can now output TRUE radius as well as NOMINAL radius values based on the radius table.

Other Changes

• Fixed slow dragging control windows in STEP mode The End Scan Diameter
• Faster saving and loading of VTube persistence files makes VTube load and close faster
• New options in XYZ pop-up menus
• The formula for building the centerline in the split bend area is improved and more reliable.

Other Pages

• Back to the VTube-LASER page
• See VTube-LASER Customer Support Page to download the latest version.