VTube-STEP v2

Revision 2.0 Back to VTube-STEP Back to VTube-STEP Revisions Back to VTube Software Updates (for LASER Mode) Back to VTube-LASER

• See VTube-STEP Customer Support Page to download the latest version.

NEW: Path Manager

This change to VTube is a huge time-saver. Customers that have tested this feature report that they are very happy it. The new Path Manager allows you to store and recall complex file paths from VTube without having to constantly drill down into folders and paths.

FIXED: Ball Probe Issues

We fixed a ball probe measurement issue where VTube would sometimes not always seem to take in the single points from the FARO driver. This issue created problems with measuring cut planes too. If you measured cut planes, and still couldn't get the cut plane to work properly, then it was probably due to this issue.

NEW: Springback Compensation Switch in CSM M4 Export Menu

The CSM M4 Export menu now includes a Springback Compensation switch to enable or disable compensation. For springback compensation to be effective, it is necessary to have values other than 0 in the proportional and fixed springback fields in the Part Setup menu.

Other

• Back to VTube-STEP
• Back to VTube Software Updates (for LASER Mode)
• Back to VTube-LASER