CNC Bender v14.8
From ATTWiki
v14.8 - August 11, 2014
|
|
ENHANCED: Now Extra Clamp Opens BEFORE Pressure Die Return with TIMER
|
If an extra clamp is present, then it will now always open first before the Pressure Die Returns with a TIMER setting. |
ENHANCED: TEST BEND PD+
|
The Pressure Die open and close in the TEST BEND page can now be actuated no matter what position the CLAMP die is in. |
Other Pages
- Back to CNC Bender
- Back to CNC Bender Software Updates
- See CNC Bender Customer Service Page for an update.
- See CNC Bender General Information
- See Teach Mode
- See Custom Commands
