Revision: Benderlink for BLM 5.3

Revision 5.3 Back to Benderlink for BLM Revisions Back to Benderlink for BLM Back to Benderlink

• See Benderlink for BLM Customer Support Page to download the latest version.

NEW - Large Green LED to Show Measuring Center Monitoring

A new larger green LED port indicator to show that Benderlink is monitoring for measuring center communications. It is also possible to click on the LED to toggle the measuring center monitor state.

ENHANCED - The LASERVISION Protocol is Enhanced

The internal communications logic was enhanced to work properly with Windows versions of LASERVISION. (It already worked with DOS versions of LASERVISION.)

NEW - Click on LEDs to Open Port to Measuring Center

You can now click on the LED port indicator to open a connection to the measuring center.

FIXED - Ping Port Confirmation Works in Newer Windows

This feature allows Benderlink to ping for a serial device server before opening a virtual port. The feature worked in older Windows - but did not work in Windows 7 and higher. Now it works in the newer Windows versions too.

NEW - Message Warning for Ports That Cannot Open

When a port to the measuring center cannot open, Benderlink now displays a message that a problem occurred.

Other Pages

• Back to Benderlink for BLM Revisions
• Back to Benderlink for BLM
• Back to Benderlink

• Go to the main website Benderlink for BLM page
• About BLM Group USA