VTube Software Updates

From ATTWiki
Revision as of 18:47, 4 April 2019 by Mcone (Talk | contribs)

Jump to: navigation, search

Vtube-laser logo 1.96.png
See a complete list of VTube updates on this page.

Vtube-laser v2.7 screenshot.png



Gears view small.png VTube-LASER - Second Quarter - 2019

April 3, 2019 VTube-LASER v2.9.19 - Build 4
  1. New - Compatible with Baces USB arms
  2. New - STEP Mode Alpine M4 and CSM M4 export filenames can use more than 20 characters.
  3. Fix - Correction data logic for sending data to the COMCO is fixed.

Vtubelaser bacesarm.png

Gears view small.png VTube-LASER - First Quarter - 2019

March 12, 2019 VTube-LASER v2.9.18 - Build 18
  1. New - AUTOMATIC LASER SEPARATION for UniScan improves laser scanning coverage by adjusting the laser separation distance in real-time.
  2. New - CORRECTION DATA MAPPING allows you to move corrections up or down or skip them in Bender Data Setup
  3. New - BLM CMM Protocol makes communications with BLMs much easier
  4. New - COMCO Protocol allows you to setup and correct COMCO benders.
  5. New - OMCG Wire bender communication protocol
  6. New - Default Radii values: Added two additional default radii (Radius 1, 2, and 3)
  7. New - Syncrhonized any of the three default radii to the tube shapes.
  8. New - Small diameter warning for when linear values are smaller than normal during import.
  9. New - Autobuild Parametrics calculates the cut length automatically.
  10. New - A new button in Tube Data Storage allows you to copy only the MEASURED back into main memory.
  11. Fix - VTube-LASER now displays an icon in the Task Bar.
  12. Other changes and fixes

Vts v2.9.18 BenderSetup OMCGSVNET.pngVts v2.9.18 BenderSetup COMCOCSV.png

Ra8 stripes auto laser separation.png
Vtl v2.9.18 BenderSetup CorrectionMappingCloseUp.png
Vts v2.9.18 BenderSetup BLMCMM.png



January 17, 2019 VTube-LASER v2.9.17 - Build 42
  1. Automatic floating Measured Guide Viewport window shows the entire tube during measuring
  2. Scan point clouds to send to SOLIDWORKS
  3. Much faster Autobuild Parametrics feature calculates imported parts 5 times faster (STEP mode)
  4. Change Cylinder Fit tolerances during measurement from a list of setups to scan highly deformed tube
  5. One-button conversion of models with the new Autobuild Parametrics
  6. FIVE times faster conversion from STEP and IGES
  7. Command Server converts STEP and IGES models for external programs
  8. Client tester program for simulating calling to the new command server
  9. Now correctly handles 180-degree bend corrections for bender communications
  10. Automatically display the DRO (Digital Readout) when changing from STEP to LASER mode.
  11. Automatic set of Straight Count to a non-zero value when measuring
  12. Limits max points per laser stripe to 50 in UniScan
  13. Path Manager enhancements
  14. Better handling of arm connection errors
  15. Fix in communication of corrections with Eaton Leonard legacy benders
  16. Added Rad2 and Rad3 fields in Part Setup and Bender Setup to allow for easier conversion to benders that require radius values assigned to levels (like Eaton Leonard and YSE)
  17. Collected Features menu with new buttons (STEP Mode)
  18. BLM VGP-3D Bender Data Report
  19. New Precision Weight Control setup grid popup menu
  20. Other changes and fixes

Vts v2.9.17 autobuildparametrics icon.png

Vtl v2.9.17 MalibuControlArm closeup.png

Vtl v2.9.17 bucketlist.png

Vtl v2.9.17 PointCloudScanToSOLIDWORKS.png

Gears view small.png VTube-LASER - Fourth Quarter - 2018

October 19, 2018 VTube-LASER v2.9.16
  • New - Reverse XYZ Data and Reset Point Labels at the same time
  • Fix - Synchronize Reversed XYZ Data in STEP and LASER
  • New - Import the EL Premier TOOL setup to VTube-LASER Bender Setup

Vtl v2.9.16 ReverseXYZandLabels.png


October 8, 2018 VTube-LASER v2.9.15
  • New - END LENGTH FILTER shifts length corrections between A-End and B-End
  • Fix - Important fix for importing and measuring 180-degree bends
  • New - The SUPRAVISION BATCH IMPORT now uses the default project setup to build VTube project files
  • New - VTube-STEP now imports Autodesk Inventor tube XYZ files
  • Fix - "Reset Point Labels" issue

Vtl v2.9.15 EndLengthFilter Graphic.png

Gears view small.png VTube-LASER - Third Quarter - 2018

August 29, 2018 VTube-LASER v2.9.14
  • New - VTube is now compatible with the new FARO 8-Axis Driver released in August, 2018
  • New - VTube now allows you to use FRACTION values for floating point numbers in Part Setup, XYZ Grid, and LRA Grid
  • New - VTube can now report absolute style CONRAC bender corrections
  • Fixed - Clearing all Cut Planes from the Cut Plane List Now Works
  • New - RONIKolli7 Bender Simulator ASCII XYZ file import

Vtl v2.9.14 fractions.png


August 16, 2018 VTube-LASER v2.9.12
  • New - NOTE LIST in Part Setup for an unlimited number of notes per project
  • New - LRA popup menu command splits a bend into two adjacent bends
  • New - Minimum Clamp Length Filter for Corrections
  • Fix - Export selection mode now works properly
  • Fix - The RECALL button now enables for the appropriate bender protocols.

Vtl v2.9.12 splitbend into twobends vertical.png


July 30, 2018 VTube-LASER v2.9.11
  • New - Enhanced Laser Scan Logic for Rectangular and Square Tubes
  • Fix - Rectangular Probe Compensation Offset Direction Logic Corrected
  • New - Split Bends rows are now highlighted yellow in the LRA grids.
  • Fix - We discovered issues with and fixed Absolute LENGTH data (MIL-D-9898C) calculations for Split Bends.
  • New - STAR TECHNOLOGY Bender Corrections Through a Network
  • New - (New Value) Maximum point per stripe for END SCANS makes graphics redraw faster
  • Fix - Bender Setup Window Display on Reduced Monitor Count
  • Fix - End Length Deviations in Tube Data Storage

Vtl v2.9.11 rectangular laser scan image.png

StarEvoSplash.png


July 5, 2018 VTube-LASER v2.9.10
  • New LASER FILTER- Minimum Point Count setting for LASER stripes reduces outliers
  • New - "LASER SCAN DATA" FILTER sound indicates when all scanned data is removed by the filters or the scanner is out of range
  • New - Press the accept button without needing to aim at the part
  • New - HERBER NEW PART setup
  • New - HERBER CORRECTIONS
  • New - VTube-LASER tuned to handle the new FARO 6.1.2.7 driver
  • New - Minor fixes

Vtl v2.9.10. laserscanfilter sound.png

HerberSplash.png

Gears view small.png VTube-LASER - Second Quarter - 2018

June 15, 2018 VTube-LASER v2.9.9
  • New - SCP (Stripe Cut Plane) measure feature removes entire stripes that are out of range based on the front diameter. (VTube-LASER mode)
  • New - Viewport change now connects laser stripes with thick lines for much easier viewing of stripe data. (VTube-LASER mode)
  • New - Automatic Negative Straight Fix During Parametric Rebuild (VTube-STEP mode)
  • Fix - Tube Construction Feature now works again. (VTube-LASER mode)
  • Fix - COLLECTION FEATURE object delete. (VTube-STEP mode)

VTube-LASER v2.9.9 StripeCutPlaneWithLogo.png


May 16, 2018 VTube-LASER v2.9.8
  • New - Restore Window screen locations at load.
  • Fix - MTA - Measured Tube Averaging
  • New - For bender corrections: Warn operators when correction damping is active
  • New - Show "Split bends present" in warning header when they are present
  • New - A-End and B-End Offset values in reports
  • Enhanced - Split Bend calculations more robust in STEP mode
  • New- Set Split Bend to active for each split bend imported
  • Enhanced - Improved float window handling
  • New - Put Part Number in the "Displayed in UI" field when importing models
  • Enhanced - Improved internal configuration file handling

VTube-LASER v2.9.8 threescreen.png


April 5, 2018 VTube-LASER v2.9.7
  • New - Export any report to a remote path.
  • New - Automatic offer to copy MEASURED to MASTER during reverse-engineering.
  • Fix - Floating Window Issues Resolved
  • New - Measured Tube Averaging (MTA) enhancements in the User Interface.
  • New - Tube Control Window - Buttons Hide and Display Based on Context
  • New - "Radius Zero Found" warning
  • New - Tube Inspection Report that mimics the old Supravision report
  • Fix - Collected Items Selection and Delete
  • New - Japanese language file update

VTube-LASER-V2.9.7 ExportHTMLReportToPath.png

Gears view small.png VTube-LASER - First Quarter - 2018

March 13, 2018 VTube-LASER v2.9.6
  • New AB Length tolerances and color-coded reporting
  • New Optional out-of-tolerance text in reports like older Supravision reports
  • New go directly to report print button

VTL Single Tube with shadow.png
March 2, 2018 VTube-LASER v2.9.5
  • Faster User Interface
  • Fixed Solid Model image print in reports
  • New Separate Perspective Mode for LASER
  • New Request Reverse Calc when leaving LRA grids
  • Repaired Reverse Calc Orientation Issue
  • Fixed build to SOLIDWORKS feature for assemblies
  • New DENGLER VDS Import
  • New DENGLER VDS Output
  • New BEND-TECH BTTX 7x Import
  • New Minimum Clamp Length Value
  • New "Length less than clamp" warning
  • New "Zero-degree bend" angle warning

VTL Single Tube with shadow.png
February 14, 2018 VTube-LASER v2.9.4

NEW in 2.9.4:

  1. MICROSCRIBE Fix for ball diameter value setting
  2. UI improvements

Vtube-laser v2.9 assembly screen logo.png


February 4, 2018 VTube-LASER v2.9.3

NEW in 2.9.3:

  1. MTA (Measured Tube Averaging) for super accurate measures
  2. WAFIOS Bender Correction
  3. NUMALLIANCE Bender Correction
  4. DENGLER Bender Correction
  5. MICROSCRIBE arm connection
  6. ASSEMBLY build to SOLIDWORKS
  7. CHIYODA EX CHS File IMPORT
  8. Several UI improvements

MTA Banner.png

Gears view small.png VTube-LASER - Fourth Quarter - 2017

December 12, 2017 VTube-LASER v2.9.2
  • FIX - Repaired a bug in Split Bend and Bend Profile point cloud projections.
  • FIX - Rare condition issue with end trim fixed. (build 108)
  • FIX - Bender number remembered after part measure. (build 109)

Vtube-laser v2.9 assembly screen logo.png
November 27, 2017 VTube-LASER v2.9.1
  • FIX- Footer page number in Reports now displays correct total page count.
  • Added SMI Input
  • Fixed SMI Output

Vtube-laser v2.9 assembly screen logo.png



November 1, 2017 VTube-LASER v2.9

MAJOR NEW FEATURE: ASSEMBLY

  • NEW - ASSEMBLY: Enter, measure, align multiple tubes in one project.
  • NEW - ASSEMBLY Control Window
  • NEW - Support for FARO QUANTUM ScanArms
  • IMPROVED - The end-of-measure process automatically builds a measured tube at Finish and Apply.
  • IMPROVED - VTube-LASER loads the LASER window first at startup (rather than the VTube-STEP window).
  • FIXES and ENHANCEMENTS - Z order screen fix for floating windows, faster sounds for remeasure, Guide window displays in lower right corner to avoid DRO, imported model deletion fix
  • End Scan Diameter Qualification Tolerances are no longer used.

Vtube-laser v2.9 assembly screen logo.png

Gears view small.png VTube-LASER - Third Quarter - 2017

July 26, 2017 VTube-LASER v2.8.5
  • NEW - Partial Import feature that allows users to load MASTER data without importing measuring center setup
  • IMPROVED - "Remove arm from cradle" message removed for when loading new files.
  • NEW - SEARCH box in Path Manager

Vtl screen hd scanner without logo.png

Gears view small.png VTube-LASER - Second Quarter - 2017

June 22, 2017 VTube-LASER v2.8.4
  • NEW - "Screen Switch" Buttons for Multiscreen Support
  • NEW - Measured-aligned to MASTER Datum Reports
  • IMPROVED - Keep Original Part Orientation in Reverse Calc
  • IMPROVED - Report Window To Front

Multi-screen support - STEP and LASER.png


June 12, 2017 VTube-LASER v2.8.3
  • NEW - Extra Bend Rows Allowed in Bend Setup for End Trim Operations
  • NEW - Multiscreen Support
  • NEW - Addata ZModem Protocol
  • NUMALLIANCE output now handles 180-degree bends and springback compensation
  • Improved DOCS file import
  • Improved Supravision import
  • Fixed imported model deletion issue during parametric model build
  • Fixed hidden Report Window display issue
  • Added new Scanner Control button above the viewport

Vtube v2.8.3 multi-monitor support.png

Vtube-laser v2.8.3 addextra lra rows bendersetup.png

Vtube-laser v2.8.3 AddataZModem SendBox.png


April 11, 2017 VTube-LASER v2.8.2
  • NEW - DCF for Split Bend
  • RETURNED - Arm as Mouse
  • Various fixes

Vtl screen hd scanner without logo.png

April 8, 2017 VTube-LASER v2.8.1
  • NEW - Second Point Object for Visual End Offsets
  • NEW - DCF - Dual Cylinder Fit Engine is now also applied to MULTISCAN
  • NEW - Switch between UNISCAN and MULTISCAN on-the-fly
  • NEW - Guide Box and sound notification for when switching between LASER and BALL PROBE.
  • NEW - Guide Box and sound notificaton when switching from UNISCAN to MULTISCAN and back.
  • ENHANCED - Cylinder Fit Checks

Vtube-laser v2.8.1 end offset model.png
Vtube-laser v2.8.1 end offset model illustration.png


April 19, 2017 VTube-LASER v2.8
  • MAJOR NEW FEATURE - DCF - Dual Cylinder Fit Engine
  • NEW Redesigned Cylinder Fit Data Window
  • NEW Default End Tolerance Set
  • NEW Tangent Midpoint Tangent Deviation AVERAGE for Reports
  • NEW Tangent Midpoint Tangent Deviation MAXIMUM for Reports
  • ENHANCED Winton WMC Communications
  • UPDATED Japanese Translation

Vtube-laser v2.8 DCF logo.png
Vtube-laser v2.8 cylinderfit window sections.png

Gears view small.png VTube-LASER - First Quarter - 2017

February 11, 2017 VTube-LASER v2.7
  • NEW Snap to Axis Transformations
  • NEW Best Fit Alignment 3
  • NEW String Measure for Navy
  • NEW Bender formats: CRIPPA, SOCO, BLM, HVAC OMS
  • NEW Edit EL Data inside VTube
  • NEW MIL-D-9898C Import
  • NEW Shortcut key popup help
  • NEW Shortcut key commands
  • NEW SOLIDWORKS 2017 Control
  • Significant User Interface Enhancements
  • NEW Import BendTech BTTX Files
  • NEW Import Alpine and CSM M4 MBF Files
  • Several important debugs
  • Memory and Speed Optimizations

Vtube-laser v2.7 screenshot.png

Ussubmarine.png

Solidworks2017-launch-logo.png

Vtube-laser-2.2 hybridtube logo.png

Gears view small.png VTube-LASER - Third Quarter - 2016

July 27, 2016 VTube-LASER v2.6
  • NEW DCP - DIAMETER CUT PLANES This powerful feature lets you measure across several diameters at the same time on parts that twist back on themselve. VTube will select the correct diameter scan points automatically.

  • ENHANCED - MULTIPLE CUT PLANES - We've completely redesigned CUT PLANES in VTube. Create cut planes at any time, change any setting on the fly, turn cut planes on/off - even during a regular measure.
DCP Logo Graphic with Exhaust Header.png

Gears view small.png VTube-LASER - Second Quarter - 2016

June 22, 2016 VTube-LASER v2.5
  • NEW Bend Profile Measure to calculate RADIUS
  • NEW Bend Profile Measure to calculate Out-of-round % in bend
  • IMPROVED Best Fit
  • NEW AIM wire bender communication
  • NEW Calculate predicted effect on AB length if trimmed
  • NEW SAVE banner
  • NEW HOT Keys for SAVE and LOAD
  • NEW Tangent point data in Reports
  • NEW calculate tube elongation percentage
  • NEW Tube Data Storage Displays Multi-part LRA Adjustment Values
 Vtube-laser v2.5 bendprofile measure scanner.png.png

Gears view small.png VTube-LASER - First Quarter - 2016

March 25, 2016 VTube-LASER v2.4 Added new accumulated length values for reports, fixed the automatic image update in the reports window. Vtube-laser 1.89 mainscreen.png
February 10, 2016 VTube-LASER v2.3 Multi-elongation Setup for multiple elongation, Springback-compensated grids, Springback-compensation output for benders fixed, Automatic Image Refresh state storage fixed Vtube-v2.3 multielongation setup.png
January 21, 2016 VTube-LASER v2.2 3X faster graphics, faster scanning for HD scanner, tube measuring averaging with Hybrid feature, many other new features added Vtube-laser-2.2 hybridtube logo.png

Gears view small.png VTube-LASER - Second Quarter - 2015

June 12, 2015 VTube-LASER v2.1.2 New model import features in STEP mode, tube label fixes, DRO transparency, now handles floating point systems that use commas rather than decimal points for measuring. Vtube-laser 2.1.2 hvac with points.png

Gears view small.png VTube-LASER - First Quarter - 2015

February 16, 2015 VTube-LASER v2 New VTube Path Manager, New Winton WMC Bender Data Setup Editor, other fixes and enhancements. Vtube-laser 2.00 WintonBenderDataSetupEditor.png

Gears view small.png VTube-LASER - Third Quarter - 2014

Novermber 25, 2014 VTube-LASER v1.99 "Pull arm from cradle" message removed for automatic scan modes. Added green arm connected LED lamp to Arm Utilities menu. New CSM M4 and Alpine M4 bender correction. Vtube-laser 1.89 mainscreen.png
November 12, 2014 VTube-LASER v1.98 Changes to transfer of bender adjustment values into Bender Setup menu. Vtube-laser 1.89 mainscreen.png
November 7, 2014 VTube-LASER v1.97 Two new import types are added to VTube-STEP: Laservision CSV and SolidWorks 3DSketch Vtube-step-1.97 import SolidWorks 3DSketch.png
October 27, 2104 VTube-LASER v1.96 High density point scans draw faster on the screen. Increased maximum stripe resolution for compatibility with the v6 scanner. Critical fix for Split Bend. Point clouds draw in viewport in realtime starting in this version. Point labels are more efficient. Languages updated. Vtube-laser-1.96 SplitBend .png



September 1, 2014 VTube-LASER v1.94 Now permanently store every measured and aligned data iteration in the Tube Data Storage feature. Vtube-laser-1.94 tubedatastorage.png



July 23, 2014 VTube-LASER v1.93 The Default Tolerance value is moved into the Part Setup menu for convenience. Vtube-laser 1.89 mainscreen.png
July 15, 2014 VTube-LASER v1.92 New export to Eaton Leonard Laservision spreadsheet in VTube-STEP (included with VTube-LASER). Other minor fixes. Vtube-step-1.92 screenshot.png

Gears view small.png VTube-LASER - Second Quarter - 2014

June 30, 2014 VTube-LASER v1.91 New Leapfrog allows arm to measure very long tubes, redesign of automatic alignment math, fixed bug in end trim distance math, new expanded inspection data grids, new +/- tolerances for XYZ intersection deviations

Threetargets closeup.png
April 15, 2014 VTube-LASER v1.90 Alpine bender - output as roll bend, fixes to minor bugs in counts on the display, saves the imported model to the project file, improved QuickLoad, Bender Data ehancements

Vtube-laser 1.89 mainscreen.png

Gears view small.png VTube-LASER - First Quarter - 2014

March 25, 2014 VTube-LASER v1.89 Fix for disappearing floating windows, LED indicates arm connected, added new sound for calc complete, multicolor Guide window depending on current viewport mode

Vtube-laser 1.89 mainscreen.png

March 11, 2014 VTube-LASER v1.88 Critical fix for FARO driver change for using ball probes. Adjustment Enhancements in UniScan mode for using the ball probe. New stripe count in the DRO when using the scanner.

Vtube-laser 1.87 mainscreen.png

February 25, 2014 VTube-LASER v1.87 New UniScan. New cylinder spike filter. New Quick Load window. New red button to early stop stripe scanning. Added Radius output to Winton ECNC4 communications.

Vtube-laser 1.87 mainscreen.png

January 20, 2014 VTube-LASER v1.86 Addressed issues with windows disappearing on certain Dell laptops during measurement. Added AddisonMckee IV enhanced communications features. VTube now stores the bender number with the project file save.

Vtube-laser-1.86-userinterface.png

January 2, 2014 VTube-LASER v1.85.1 Optimized to be faster than previous versions, Memory leaks plugged in the Alignment feature, Benderlink setup menu enhanced, timers optimized for faster performance. Added both + and - tolerances to the end lengths, added color to XYZ intersection deviations in reports

Vtube-1.85.1 endlength plusminustolerance envelopes.png

Gears view small.png VTube-LASER - Third Quarter - 2013

July 29, 2013 VTube-LASER v1.83 Function shortcut keys, new right side menus are grid-based, can collapse, can change font sizes, can change widths, Bender Setup menu tracks last date/time of communications in both directions, TubeCalc elongation converter, Supravision export repaired, much more...

Vtube-laser-1.83-allcollapsed menus.png

Gears view small.png VTube-LASER - Second Quarter - 2013

June 19, 2013 VTube-LASER v1.82 Measure rectangular tube, automatic build to SolidWorks Vtube-laser-aligned rectangular.jpg
April 19, 2013 VTube-LASER v1.81.6 New FARO arm utilities menu. Vtube-laser-1.82 armutilitieswindow.jpg


April 2, 2013 VTube-LASER v1.81.5 New features added to the Language Editor, fix to Point Label Balloons Vtube-laser-1.81.4.graphicpointlabels2.jpg

Gears view small.png VTube-LASER - First Quarter - 2013

March 28, 2013 VTube-LASER v1.81.4 MANY new features - like balloon point labels, new reports, new copy/paste grids, new copy model to clipboard as bitmap Vtube-laser 1.81.4.jpg
February 22, 2013 VTube-LASER v1.81.3 New UNDO feature. Moved configuration files to a new location to make multiple-user installations simpler. Vtube-laser dro with captionbox.jpg
Unreleased VTube-LASER v1.81.1 Enhanced Transfluid communication protocol. Adjusted Ribbon calculation output. Vtube-laser 1.81.jpg
January 8, 2013 VTube-LASER v1.81 New Winton ECNC 4 protocol for bender correction, new transform centerline so that any bend is true, new separate templates for STEP and LASER modes. Vtube-laser 1.81.jpg

Gears view small.png VTube-LASER - Fourth Quarter - 2012

November 26, 2012 VTube-LASER v1.80.1 Resolved grid text header draw issue, silenced error when now sound drivers present Vtube-laser 1.78.jpg
November 20, 2012 VTube-LASER v1.80 New centerline TRANSFORMATION feature - make any bend true with the radius value centered. Fixed an end trim bug for one bend parts. Vtube-laser 1.78.jpg
November 9, 2012 VTube-LASER v1.79 New export to CAM2 Measure 10 - either MASTER or MEASURED. New radius table in XYZ popup grid for storing often used radii - both nominal and true (undercut), and more Vtube-laser 1.78.jpg


October 3, 2012 VTube-LASER v1.78 New "Supplier" field in Part Setup. New pop-up menu features - set 0,0,0 in any row, and mirror image the part. New output master LRA with springback to Supravision file. New report with springback in master LRA data. Vtube-laser 1.78.jpg

Gears view small.png VTube-LASER - Third Quarter - 2012

August 28, 2012 VTube-LASER v1.77.4.4 Updated Chinese for v1.77 Vtube-laser 1.77.4.jpg
August 20, 2012 VTube-LASER v1.77.4.3 Minor revision: Works better with foreign date/times. Vtube-laser 1.77.4.jpg
August 14, 2012 VTube-LASER v1.77.4 Serious enhancement in Automatic Weighting in Best Fit. Recent Project File List. New "Save" - not just "Save As...". Floating Pulldown menus. Vtube-laser 1.77.4.jpg
August 8, 2012 VTube-LASER v1.77.3 Material now changes length with new End Adjustment Length Values, brand new orientation control with axis images, repaired cut length calculation. Vtube-laser 1.77.3.jpg
August 4, 2012 VTube-LASER v1.77.2 Fine-tune Cut Plane model display Vtube-laser v1.77.jpg
August 3, 2012 VTube-LASER v1.77.1 Allows the Cut Plane model display to be switched off. Vtube-laser v1.77.jpg


August 1, 2012 VTube-LASER v1.77 HUGE UPDATE - Automatic weighting during Best Fit alignment, Hard Point alignment, new Part Setup fields, Chinese translation, new STEP interface for inputs, new damping in report, new Polar calculator... Vtube-laser v1.77.jpg

Gears view small.png VTube-LASER - First Quarter - 2012

March 31, 2012 VTube-LASER v1.76.3 Automatic Damping Correction feature prevents overcorrection Vtube-pro 1 76.3.jpg
March 15, 2012 VTube-LASER v1.76 Coping layout feature Vtube-pro 1 76.jpg
February 9, 2012 VTube-LASER v1.75.4 Merge bends feature Vtube-laser 1 75.jpg
February 7, 2012 VTube-LASER v1.75.3 Automatic Closeup of Last Measure feature. Vtube-laser 1 73.jpg
February 2, 2012 VTube-LASER v1.75.1 Page numbers are added to bottom of report. Fix to move to previous when remeasure. Vtube-laser 1 73.jpg
January 15, 2012 VTube-LASER v1.75 Scanner setup save to project is enhanced. The cylinder fit tolerance qualification is enhanced for better measuring experience. New cylinder fit error checks are added to assure good measurements. Vtube-laser 1 73.jpg
January 5, 2012 VTube-LASER v1.74 Scanner setup is now saved with the project file. It is now possible to skip either end measurement. The end-scan qualification logic is improved. Vtube-laser 1 73.jpg

Gears view small.png VTube-LASER - Fourth Quarter - 2011

October 19, 2011 VTube-LASER v1.73 Fine tuning for FARO Edge arm. The Cut Plane offset value is now displayed in interface. Cut Plane offset is now adjustable without remeasure. Sounds trimmed so that they play for shorter times. Vtube-laser 1 73.jpg
October 10, 2011 VTube-LASER v1.72 Deep scanning with up to 200 stripes per straight now allowed. Vtube-laser 1 71b.jpg
October 4, 2011 VTube-LASER v1.71 New transparent envelope models. Vtube-laser 1 71b.jpg

Gears view small.png VTube-LASER - Third Quarter - 2011

September 20, 2011 VTube-LASER v1.70 Enhanced the accuracy of inspection mathematics in special situations. Vtube-laser 1 70.jpg
September 1, 2011 VTube-LASER v1.69 Enhanced Measure Setup menu links to more Faro menus. New report values show arm and probe values like calibration dates, 2 sigma values. VTube-LASER Programmer license mode. Vtube-laser 1 69.jpg
August 8, 2011 VTube-LASER v1.68 New Excel report builder, revised Overbend calculator, new options in the Bender Setup screen, new tab menus in Master data. Vtube-laser excel.jpg
July 18, 2011 VTube-LASER v1.67 New Split Bend for precisely splitting angles that approach and exceed 180 degrees. New connect and disconnect from the arm. Vtube-laser screen 1 67.jpg

Gears view small.png VTube-LASER - Second Quarter - 2011

May 27, 2011 VTube-LASER v1.66 New save changes dialog, in-process bend angle correction Vtube-laser screen 1 66.jpg
May 19, 2011 VTube-LASER v1.65 Increased the accuracy of the radius stripe scan method for measuring bend radii, enhanced the Winton bender protocol, added invert rotation check boxes to the bender setup page, added new report charts Vtube-laser screen 1 65.jpg
May 10, 2011 VTube-LASER v1.64b Added Transfluid bender communications, added new radius stripe scan method for measuring bend radii Vtube-laser-transfluid communication.jpg
April 6, 2011 VTube-LASER v1.63d Resolved issue with end-scan qualification with ball probe Vtube-laser 1 63.jpg

Gears view small.png VTube-LASER - First Quarter - 2011

March 31, 2011 VTube-LASER v1.63 Choose from multiple custom reports on the screen. Add and edit custom report templates to VTube-LASER. Vtube-laser 1 63.jpg
March 11, 2011 VTube-LASER v1.62 End scan qualifications are much faster, new progress dialog for when end-scan is taking more time with new process cancel button Vtube-laser 1 62.jpg
March 04, 2011 VTube-LASER v1.61 New end labels identify the ends of the tube and automatic diameter handling fixes Vtube-laser 1 61.jpg
February 21, 2011 VTube-LASER v1.6 Important end-scan outlier point detection and prevention, continuous tactile scan, faster redraws, improved user interface Vtube-laser 1 6.jpg
February 7, 2011 VTube-LASER v1.59 Ball probe measurements and laser measurements now work properly together in the same tube measure. Vtube-laser 1 57.jpg
January 18, 2011 VTube-LASER v1.58 New "Construct Tube" feature that allows users to route a tube in 3D space by pointing the arm, increase or decrease points and straights on the fly when measuring tubes Vtube-laser 1 58 constructtube closeup.jpg
January 13, 2011 VTube-LASER v1.57 Supravision Import, faster alignment, improved Bender Setup, many other changes Vtube-laser 1 57.jpg
January 6, 2011 VTube-LASER v1.56 New springback compensation variables, new items in the inspection report - like the new XYZ deviation report, bender data setup menu enhanced, invert rotation feature Vtube-laser 1 56 bendersetupmenu.jpg
January 3, 2011 VTube-LASER v1.55 New enhanced radius measurement Vtube-laser radius segment measurement graphic.jpg

Gears view small.png VTube-LASER - Fourth Quarter - 2010

December 25, 2010 VTube-LASER v1.54 New DRO (digital readout), realtime intersection points, other enhancements Vtube-laser dro closeup.jpg




Other Pages

Retrieved from "http://www.advancedtubular.wiki/index.php?title=VTube_Software_Updates&oldid=39913"