VTube-LASER and True Position
|
|
|
Contents |
HOW VTUBE-LASER CALCULATES GD&T TRUE POSITION
|
VTube-LASER actually shows the "spherical radius true position" values in more than one place in the Inspection Data. |
Tangent Point Deviations: Spherical Radius True Position
| The tangent point deviations along the centerline Spherical Radius True Position values. This is a grid of those values (Tangent-Midpoint-Tangent along each straight). |
|
| This shows emphasis given to the middle straight. |
|
Values
|
The T1 and T2 TRANSLATE values control the influence that tangent 1 or tangent 2 have in each straight. This is a translation influence - which means it controls the influence along the X, Y, and Z axes without reference to any twisting motion for the alignment. The STRAIGHT VECTOR values allow each straight to have more or less influence with rotational or angular alignment - like a twist. (Twist in alignment is also referred to as "transformation" - which is distinct from "translation".
See the T1 and T2 TRANSLATE for "translation.)
|
|
Popup Menu
|
As of 2.9.17, VTube also includes a popup menu to make changing the values easier. |
|
Other Pages
- Back to VTube-LASER
- Back to VTube Software Updates (for LASER Mode)
- See also VTube-STEP
- See also VTube-STEP Revisions
- See VTube-LASER Customer Support Page to download the latest version.
- See the tutorial on DCF - Dual Cylinder Fit
- See the tutorial on DCP - Diameter Cut Planes
- See VTube-LASER Cut Planes
- See How to Measure Tubes Attached to an Evaporator with the DCP Feature
