Explain the Differences Between VTube-STEP and VTube-LASER

From ATTWiki
Revision as of 15:33, 2 December 2021 by Mcone (Talk | contribs)

Jump to: navigation, search

Vtube-laser logo 1.96.png


Vtube-step logo 2.png

Vtube-laser 1.89 mainscreen.png
Vtube-step-1.89 screenimage.png



Differences Between the VTube Types

  • VTube-STEP allows you to import solid models, send new bender data to benders, and create reports with bender data. The price for VTube-STEP is $2750 per license.



  • VTube-LASER is built on top of VTube-STEP. It allows you to measure and qualify tube shapes and correct tube benders. The price for a VTube-LASER license is $11,500.



  • VTube-LASER PROGRAMMER is an offline version of VTube-LASER that can do everything that VTube-LASER can do except that it cannot connect to an arm to measure. The advantage of LASER PROGRAMMER compared to STEP for VTube-LASER project setup is that it can also set up measuring parameters at a remote location (VTube-STEP can only import and set the part shape). The current cost is $5750.



Other Pages

Retrieved from "http://www.advancedtubular.wiki/index.php?title=Explain_the_Differences_Between_VTube-STEP_and_VTube-LASER&oldid=41735"