Benderlink Current Loop 4 Port - Measuring Center Side
From ATTWiki
Contents |
Description
This is a four port module that was designed for connecting a Benderlink computer or measuring center computer up to four Eaton Leonard benders.
Productivity Benefits
See Benderlink Current Loop Module page for a list of productivity benefits
Installation Location
This module is typically placed near the Benderlink computer which acts as the measuring center side of the connection. The module can also be attached to any measuring center using Supravision software.
About the Connections
- FOUR RJ-45 ports - This allows for use of standard ethernet cable converted to serial using RJ-45 to DB9 converters (supplied with the module)
- FOUR Military Connectors - These connectors follow the legacy Eaton Leonard style connection. You can connect standard communications cable with circular connectors at either end.
Inside the Module
This is an image of the inside of the module. It contains four of our current loop boards, one power supply, and all cabling.
Example Installation
This is an image of the box installed under the work-bench with a Romer arm and computer system.
Other Pages
- Benderlink Current Loop Module page
- Benderlink page
- Read more about the current loop board here: Communications Board for Eaton Leonard - CB-EL1
