View source for Surface Spray

<table>
<tr cellpadding=10>
<td width=300>
[[image:vtube-laser_logo.jpg|300px]]
Removable surface sprays are helpful for coating surfaces that are highly reflective or very black.  Then can also aid in marking the area to measure.<br><br>
* Back to [[Surface Coating for LASER Scanning]]
* Back to [[VTube-LASER]]
</td>
<td width=300>
[[image:vtube-laser_1_73.jpg|300px]]
</td>
</tr>
</table>
__TOC__

[[image:vtube-laser_6inch_tube.jpg|600px]]


==Foot Spray==
<table cellpadding=10>
<tr valign=top>
<td width=300>
* Inexpensive
* Does not cause an allergic reaction like the flux types below.
* Much less messy than alcohol and powder.
* Cleaning with a wipe is easy.
* Is not as dense as Magnaflux or Dynaflux.  Thick coating is not necessary.  The goal of the spray is to break the reflectivity - for which a complete covering is not necessary.
* Consistent levels of coating, however, is preferred.  Magnaflux and Dynaflux (see below) excel in consistency.
</td>
<td width=300>
[[image:goldbond_footspray.jpg]][[image:tinactin.jpg|100px]]
</td>
</tr>
</table>

==Magnaflux==

[[image:Magnaflux_Logo.jpg|200px]]

<table cellpadding=10>
<tr valign=top>
<td width=300>
Magnaflux Spotcheck SKD-S2 Developer<br><br>
* Works well
* Very expensive compared to Dynaflux ($50 to $75 per can)
* For applications that require cleaning, the corresponding cleaner is SKC-S
* May cause an allergic reaction in the skin of some operators
</td>
<td width=300>
[[image:Magnaflux_Developer.jpg|125px]]
[[image:Magnaflux_Cleaner.jpg|125px]]
</td>
</tr>
</table>

==Dynaflux==

[[image:Dynaflux_Logo.jpg|200px]]

<table cellpadding=10>
<tr valign=top>
<td width=300>
Dynaflux DF315-16 Crack Check D-F Developer<br><br>
* Works well
* DF315-16 Flammable Nuclear grade uses non-chlorinated solvent
* DNF315-16 Non-flammable Standard grade
* Very inexpensive ($5 per can)
* For applications that require cleaning, the corresponding cleaner uses the same Dynaflux part number.
* May cause an allergic reaction in the skin of some operators
</td>
<td width=300>
[[image:Dynaflux_Crackcheck.jpg|125px]]
[[image:Dynaflux_Cleaner.jpg|125px]]
</td>
</tr>
</table>

==CerMark LMM6000==

[[image:cermark_logo.jpg|200px]]

<table cellpadding=10>
<tr valign=top>
<td width=300>
CerMark LMM6000 Laser Marking Spray<br><br>
* This spray is used in additive laser bonding processes.
* Works well as it is not as messy as foot powder.
* Drys like paint - but washes off with water.
* Very expensive ($75 per can)
</td>
<td width=300>
[[image:cermark_spray.jpg|125px]]
</td>
</tr>
</table>

==Other Pages==

* Back to [[VTube-LASER]]