Difference between revisions of "Cable Spec 35"

From ATTWiki
Jump to: navigation, search
Line 85: Line 85:
 
<td>
 
<td>
  
<table>
 
<tr>
 
<td width=50 align=left>
 
2
 
</td>
 
<td width=150 align=left>
 
RXD
 
</td>
 
</tr>
 
 
<tr>
 
<td width=50 align=left>
 
3
 
</td>
 
<td width=150 align=left>
 
TXD
 
</td>
 
</tr>
 
 
<tr>
 
<td width=50 align=left>
 
5
 
</td>
 
<td width=150 align=left>
 
GND
 
</td>
 
</tr>
 
 
<tr>
 
<td width=50 align=left>
 
7
 
</td>
 
<td width=150 align=left>
 
RTS
 
</td>
 
</tr>
 
 
<tr>
 
<td width=50 align=left>
 
8
 
</td>
 
<td width=150 align=left>
 
CTS
 
</td>
 
 
</tr>
 
</table>
 
  
 
</td>
 
</td>

Revision as of 14:22, 23 May 2012

This is the wiring schematic for the RJ45 to DB9 female adapter for the CB-EL1 RS232D port on the board.

RJ45 Plug Side

 

DB9 Female Side

Yellow

6

Green

5

Red

4

Brown

7

White

8

 



This is an image of an RJ45 to DB9 adapter with the above wiring. The DB9 port is female to attach to a standard PC male port.


I2t adapter inside.jpg

I2t adapter.jpg