End-Scan Using the Scissor Motion

How to perform quick scissor motion end-scans. Back to VTube-LASER

Why the End-Scan technique is important

This end-scan method is useful for ease-of-use and quickness. Please keep in mind that our tests show that it is the least precise of the techniques that we recommend. We also recommend the End-Scan Using the End Wall technique and the most precise End-Scan Using End Targets.

How To Use This End-Scan Technique

Align the scanner with a slight scissor angle across the end as is shown in the image on the right Press the green button until VTube-LASER is finished scanning all the end stripes.

Using End Target Adapters

If you prefer using more durable end target adapter that plugs into the end of the tube, then they can be manufactured for repeatable measurements. The end target surface should be painted or covered with a flat white or near-white target. The offset from the target to the tube end is entered as a negative value in the Part Setup menu for either end.

• Back to VTube-LASER