How to Install a CNC Bender Upgrade

From ATTWiki
Revision as of 19:32, 8 October 2007 by Mcone (Talk | contribs)

Jump to: navigation, search

Cncbender logo.jpg

Cncbender setup dialog.png

SELF-INSTALL a CNC BENDER UPGRADE following these steps

  • STEP 1
    Download the setup file from the revision page.


  • STEP 2
    Get a password from Advanced Tubular for unlocking the setup file.


  • STEP 3
    Copy the setup program to a USB flash drive.


  • STEP 4
    Close CNC Bender software.


  • STEP 5
    Close the CNC Bender Loader when it reappears. The newer non-button versions of this loader will unload if you right-click on them.


Cncbender loader software.jpg

  • STEP 6
    Plug the USB drive into a USB port on the CNC Bender operator station. The older systems have USB ports inside the operator station. Some have USB ports installed on the enclosure. Newer Magelis controls feature a USB port on the front of the PC Panel bezel.


  • STEP 7
    Run the setup program

Cncbender setup dialog.png


  • STEP 8
    When the setup program is complete, remove the USB drive using the safe removal procedure. (See Safely Remove a USB Drive)


  • STEP 9
    Run the CNC Bender Loader by finding it in your START/All Programs/Startup menu.


  • STEP 10
    Run CNC Bender by pressing on the Loader


Retrieved from "http://www.advancedtubular.wiki/index.php?title=How_to_Install_a_CNC_Bender_Upgrade&oldid=4415"