CNC Bender Software Updates

Software Updates

CNC BENDER - Direct Axis Jog Clipboard

• New Direct Axis Clipboard - Jog the axis from any screen with the keypad.
• Unlimited Radius Level Expansion

October 1, 2008

CNC Bender v11-20081001

CNC BENDER - Pressure Die Assist RVG Feature - (Real-time Variable Gearing)

• Adjust the PDA GEARING RATIO to the Bend axis in REAL-TIME in response to the bend angle
• Unlimited Axis Expansion
• Options Toolbox

September 23, 2008	CNC Bender v11-20080923
September 19, 2008	CNC Bender v11-20080918
September 15, 2008	CNC Bender v11-20080915

CNC BENDER - Push-Bending Versions

These versions are for horizontal draw-bending and horizontal push-bending.

August 23, 2008	CNC Bender v11-20080823
August 22, 2008	CNC Bender v11-20080822
August 13, 2008	CNC Bender v11-20080813
July 29, 2008	CNC Bender v11-20080729
July 25, 2008	CNC Bender v11-20080725
July 15, 2008	CNC Bender v11-20080715
April 25, 2008	CNC Bender v11-20080424

For Both ProControl and LiteControl

April 15, 2008	CNC Bender v10-20080415
April 10, 2008	CNC Bender v10-20080410
April 7, 2008	CNC Bender v10-20080407
March 29, 2008	CNC Bender v10-20080329
March 19, 2008	CNC Bender v10-20080319
February 26, 2008	CNC Bender v10-20080226
February 19, 2008	CNC Bender v10-20080219
February 14, 2008	CNC Bender v10-20080214
February 7, 2008	CNC Bender v10-20080207
January 8, 2008	CNC Bender v10-20080108
December 17, 2007	CNC Bender v10-20071217
November 20, 2007	CNC Bender v10-20071120
October 30, 2007	CNC Bender v10-20071030
October 3, 2007	CNC Bender v10-20071003
September 28, 2007	CNC Bender v10-20070928
September 20, 2007	CNC Bender v10-20070920
September 14, 2007	CNC Bender v10-20070914
August 28, 2007	CNC Bender v10-20070828
August 3, 2007	CNC Bender v10-20070803
July 26, 2007	CNC Bender v10-20070726b
July 11, 2007	CNC Bender v10-20070711
July 5, 2007	CNC Bender v10-20070705
July 2, 2007	CNC Bender v10-20070702

As of July 2, 2007, the ProControl and LiteControl were combined into one development platform. All changes to one platform automatically effect the other platform

For ProControl Only

March 30, 2007	CNC Bender ProControl 10-20070330
March 15, 2007	CNC Bender ProControl 10.0.6.2
November 6, 2006	CNC Bender ProControl 10.0.6.0jkm
October 27, 2006	CNC Bender ProControl 10.0.6.0i
July 17, 2006	CNC Bender ProControl 10.0.5.9
May 15, 2006	CNC Bender ProControl 10.0.5.7e

For Older LiteControl on 800x600 Screens

September 5, 2008	CNC Bender LiteControl 10.0.6.0
May 30, 2008	CNC Bender LiteControl 10.0.5.9g

Upgrade Policy

See our CNC Bender Upgrade Policy page for details regarding the charges for the upgrade software.

Other Pages

Back to CNC Bender page