VTube Communication with YLM Benders

From ATTWiki
Revision as of 15:56, 26 June 2013 by Mcone (Talk | contribs)

Jump to: navigation, search
YLM benders are built in ???? and distributed in the Americas by J & S Machine, Inc.

Unsion logo.jpg
Unsion bender 3drendering.jpg

Contents

YLM Control software

The YLM Windows software allows for complete programming of bender setup. It includes a bender simulator.

Unision simulator.jpg

VTube-STEP and VTube-LASER Support for YLM Benders

VTube-STEP can export Supravision data to YLM benders.

VTube-STEP also exports special bender data for the UNISON control for bending ribbon shaped stock.

VTube-LASER, the version of VTube that connects to a FARO measuring center arm, can send radius UNISON benders for correction of large radius push bends. The LASER version can also send single bend angles to UNISON benders for large pipe application where correcting the bend angle with the pipe still in the bender.

YLM Main Screen.jpg
YLM Import Screen.jpg

Contact Information

Unison Ltd
Jim Saynor, Sales Manager
Faroe House,
Thornburgh Road,
Eastfield,
Y011 3UY
Phone: +44 (0) 1723 582868
Fax: +44 (0) 1723 582379
Email: [email protected]

J & S Machine, Inc.
W6009 490th Avenue
Ellsworth, WI 54011
Phone: (715) 273-3376
Email: [email protected]

Other Pages

Retrieved from "http://www.advancedtubular.wiki/index.php?title=VTube_Communication_with_YLM_Benders&oldid=22096"