VTube-LASER v2.7

Revision 2.7 Release Date: Not Released Back to VTube-LASER Back to VTube Software Updates (for LASER Mode)

NEW - BLM VGP 3D Bender Communications

We've embedded Benderlink for BLM bender communications inside VTube-LASER. This protocol uses communications through a standard Ethernet connection. The protocol modifies YBC data inside BLM data files.

NEW - SOCO Bender Communications

A new SOCO-specific bender communications protocol is now built into VTube-LASER. This protocol uses communications through a standard Ethernet connection. The protocol can send XYZ data for building new parts, or modify YBC data in the Execution File page when the bender is running in Auto mode. See VTube Communication for SOCO for details.

ENHANCED - Tube Centerline XLS Import for TeZet Data

In order to help with migration from TeZet to VTube-LASER, the Excel XLS file import in VTube-STEP (included in VTube-LASER) is enhanced to handle TeZet file imports better. The import automatically discovers the XYZ row with no data in order to set the point count. The import lets you set the part number from the XLS data. The import lets you set the diameter from the XLS data. The import lets you set the wall thickness from the XLS data. The import automatically sets the default radius value in the Part Setup menu.

ENHANCED - Path Manager Checkbox - Offer to Add New Paths

A new checkbox in the Path Manager allows you to control if VTube offers to add new paths detected. Some customers find the repeated offer by VTube annoying. This will allow you to turn this feature on and off.

NEW - Probed Points Now IGNORE Cut Planes

As of this version, VTube-LASER will ignore cut planes when in tactile probe mode. After observing how customers use the cut plane, we've concluded that it is best to let probed points be measured anywhere - even beyond the cut planes. Now cut planes are used exclusively for the LASER scanner. If the LASER scanner is active, then active cut planes are also used. See VTube-LASER Cut Planes See the tutorial on DCP - Diameter Cut Planes

NEW - Complete Eaton Leonard Legacy Setup Data inside VTube-LASER Bender Setup

VTube-LASER will now allow for the complete setup of all bender and setup data that can be stored in a Premier, EL2000, or Velog control. This allows you to completely setup an EL Premier bender from within VTube-LASER. Also, this data is now stored with the VTube-LASER project files. If you enter any Eaton Leonard parameter, it is stored as part of the VTube project for recall from file in the future. Press the new "Additional Bender Data" button at the top of the Bender Setup screen, and VTube will now load the new window shown on the bottom. This data includes all the part setup data and all the data that is included in each YBC row, including these data columns: Y Y Velocity Y Function Y Stop B B Velocity B Function B Stop C C Velocity C Function C Stop C Last Click on the image on the right so see a close-up of this screen. YBC Data Automatically Synchronized with Blue Column LRA Data The YBC data in this new Eaton Leonard Setup window is always synchronized with the blue columns in the parent VTube Bender Setup window. You can change the data in either window, and the corresponding data in the other window will automatically change. All Eaton Leonard Bender Data is Updated By RECALLs from the Bender A VTube-LASER data RECALL from an Eaton Leonard bender will overwrite ALL of this extra setup data automatically. See Eaton Leonard

Other Pages

• Back to VTube-LASER
• Back to VTube Software Updates (for LASER Mode)
• See also VTube-STEP
• See also VTube-STEP Revisions
• See VTube-LASER Customer Support Page to download the latest version.
• See VTube-LASER Cut Planes
• See the tutorial on DCP - Diameter Cut Planes
• See How to Measure Tubes Attached to an Evaporator with the DCP Feature