How to Install a CNC Bender Upgrade

From ATTWiki

Revision as of 18:52, 8 October 2007 by Mcone (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to: navigation, search

SELF-INSTALL a CNC BENDER UPGRADE following these steps

STEP 1 - Download the setup file from the revision page.

STEP 2 - Get a password from Advanced Tubular for unlocking the setup file.

STEP 3 - Copy the setup program to a USB flash drive.

STEP 4 - Close CNC Bender software.

STEP 5 - Close the CNC Bender Loader when it reappears. The newer non-button versions of this loader will unload if you right-click on them.

STEP 6 - Plug the USB drive into a USB port on the CNC Bender operator station. The older systems have USB ports inside the operator station. Some have USB ports installed on the enclosure. Newer Magelis controls feature a USB port on the front of the PC Panel bezel.

STEP 7 - Run the setup program

STEP 8 - When the setup program is complete, remove the USB drive using the safe removal procedure. (See Safely Remove a USB Drive

STEP 9 - Run the CNC Bender Loader by finding it in your START/All Programs/Startup menu.

STEP 10 - Run CNC Bender by pressing on the Loader

Retrieved from "http://www.advancedtubular.wiki/index.php?title=How_to_Install_a_CNC_Bender_Upgrade&oldid=4396"