VTube Communication with YLM Benders

YLM (Yin Lin Machine Industrial Co.) benders are built in Taiwan and distributed in the Americas by J & S Machine, Inc.

YLM Control software

The YLM Windows software allows for complete programming of bender setup. It includes a bender simulator.

VTube-STEP and VTube-LASER Support for YLM Benders

VTube-STEP can export Supravision data to YLM benders. VTube-LASER, the version of VTube that connects to a FARO measuring center arm, can send measured data to the YLM control for corrections.

VTube-LASER Correction Steps for YLM Benders

The connection the bender is made with standard network connection, and a shared folder location between the VTube computer and the operator station computer. The YLM uniquely takes in VTube measured Supravision LRA data. To make a correction to a YLM bender, it is important to send only this data. The standard correction process will not work with the YLM. Follow these steps to import the measured data from VTube-LASER: Select the file to import. It will have a $$$ filename extension. Press the Compare button to compare the measured data with the existing data. Press the Import button to import the new file and change the compensation fields in the upper right corner of the Correction screen.

Contact Information

J & S Machine, Inc.
W6009 490th Avenue
Ellsworth, WI 54011
Phone: (715) 273-3376
Phone: (877) 273-3332
Email: [email protected]

Other Pages

• See the J.S. Machine Web Site
• See VTube-LASER
• See VTube-STEP