View source for Benderlink for BLM Revisions


Back to [[Benderlink for BLM]]

==== [[image:Gears_view_small.png]] Benderlink for BLM - Third Quarter - 2013====

<table cellpadding="5" width="700">
<tr>
<td width="150">July 20, 2013</td>
<td width="250">[[Revision: Benderlink for BLM 5]]</td>
<td width="200">Add reverse rotation switch, enhanced conversion process, added new style of hardware key, changed user interface</td>
<td>[[image:blinkblm_v5_screen.jpg|150px]]</td>
</tr>
</table>

==== [[image:Gears_view_small.png]] Benderlink for BLM - Third Quarter - 2009====

<table cellpadding="5" width="700">
<tr>
<td width="150">September 11, 2009 </td>
<td width="250">[[Revision: Benderlink for BLM 4.03]]</td>
<td width="200">
*No longer disable controls during communication
*Removed shutdown bug.
</td>
<td>[[image:blinkblm_v4.jpg|100px|150px]]</td>
</tr>
</table>

==== [[image:Gears_view_small.png]] Benderlink for BLM - Second Quarter - 2009====

<table cellpadding="5" width="700">
<tr>
<td width="150">May 18, 2009</td>
<td width="250">[[Revision: Benderlink for BLM 4.02]]</td>
<td width="200">
*Allow Benderlink to disable audio messages
*Repaired some minor shutdown issues
</td>
<td>[[image:blinkblm_v4.jpg|100px|150px]]</td>
</tr>
</table>

<table cellpadding="5" width="700">
<tr>
<td width="150">April 13, 2009</td>
<td width="250">[[Revision: Benderlink for BLM 4]]</td>
<td width="200">
*New Interface which includes, new LEDs, new LOAD and MERGE buttons, new Date/Time stamps
*New Adjust Data Window to adjust the YBC data before sending to the bender
*Completely rewritten HELP and MANUAL to include 100 pages of detail
*New Eaton Leonard communications engine
</td>
<td>[[image:blinkblm_v4.jpg|100px|150px]]</td>
</tr>
</table>

==== [[image:Gears_view_small.png]] Benderlink for BLM - FirstQuarter - 2009====

<table cellpadding="5" width="700">
<tr>
<td width="150">Februrary 19, 2009</td>
<td width="200">[[Revision: Benderlink for BLM 3.5]]</td>
<td width="200">*New dialogs that suggest when BLM files should be saved
*Added a pulldown menu
*Removed all automatic BLM Data File Overwrites to let the user choose
</td>
<td>[[image:blinkblm_v3.5.jpg|100px|150px]]</td>
</tr>
</table>

<table cellpadding="5" width="700">
<tr>
<td width="150">Februrary 3, 2009</td>
<td width="200">[[Revision: Benderlink for BLM 3.4]]</td>
<td width="200">
*Allow to always set internal part number to external filename
*Removed recognition for push-bending (at BLM's request)
</td>
<td>[[image:blinkblm_bender_network_setup.jpg|100px|150px]]</td>
</tr>
</table>


==== [[image:Gears_view_small.png]] Benderlink for BLM - Fourth Quarter - 2007====

<table cellpadding="5" width="700">
<tr>
<td width="150">December 7, 2007</td>
<td width="200">[[Revision: Benderlink for BLM 3.2]]</td>
<td width="200">
*Allow User to choose units being sent to the Supravision measuring center
*Increased accuracy of stored floating point data
</td>
<td>[[image:Benderlink_blm_unitsend.jpg|100px|150px]]</td>
</tr>
</table>

<table cellpadding="5" width="700">
<tr>
<td width="150">December 6, 2007</td>
<td width="200">[[Revision: Benderlink for BLM 3.1]]</td>
<td width="200">
*Confirm overwrites of BLM data files
*Save a backup of BLM data files
*Change lowercase Supravision part numbers to uppercase
</td>
<td>[[image:Benderlink_blm_confirmoverwrite.jpg|100px|150px]]</td>
</tr>
</table>

<table cellpadding="5" width="700">
<tr>
<td width="150">October, 2007</td>
<td width="200">[[Revision: Benderlink for BLM 3]]</td>
<td width="200">
*Full support for BLM VGP-based controls</td>
<td>[[image:Blm_vgp3d.jpg|100px|150px]]</td>
</tr>
</table>

==Other Pages==
Back to [[Benderlink for BLM]]