View source for Lube Machine At Part Count

''As of v10-20070711 (July 11, 2007, this property is obsolete and is no longer available.
''
__toc__

===What is It?===
This property allows [[CNC Processor]] to switch the mandrel lube output to ON after a pre-programmed number of parts have run.

===Value===
The value is set to milliseconds like this:

<pre>Lube Machine At Part Count= 500</pre>

In this case, the machine lube will activate after each 500 parts run on the machine.

===Alternative Properties===

Two alternative properties are... 

<ol>
<li>Use Bend Count For Machine Lube</li>
<li>Lube Machine At Bend Count</li>
</ol>


If [[Use Bend Count For Machine Lube]] value is set to 0 then the Lube Machine At Part Count property will be used.  Set the [[Use Bend Count For Machine Lube]] property to equal 1 to set CNC Processor to use the "Lube Machine At Bend Count" property.<br>
<br>
The [[Lube Machine At Bend Count]] property is used to set the bend count for machine lube.

--[[User:Mcone|Mcone]] 23:30, 19 July 2006 (EDT)