View source for Benderlink for Addison to Vector 5.0

<table>
<tr>
<td>
[[image:Blink_addison_elvector_logo.jpg|400px]]
</td>
<td>
[[image:blinkaddison_mainscreen.jpg|200px]]
</td>
</tr>
</table>

__NOTOC__


===[[image:Check.jpg|25px]] New - Supports Eaton Leonard Legacy Communications Protocol ===

<table>
<tr>
<td width="300">
Benderlink for Addison now supports the Eaton Leonard legacy communications protocol.  The protocol simulates communications with Premier, EL-2000, and Velog controls.  This protocol is available on every [[Eaton Leonard]] [[Vector Tube Data Center]].<br><br>

Why is this important?  '''This change makes Benderlink compatible with every Eaton Leonard Vector in the world - without modification to the EL hardware.'''<br><br>

The original protocol used was called "ATT".  The difficulty with the ATT protocol is that Eaton Leonard required custom components to be purchased and installed that only work on the older versions of the Vector.  The newer version of Vector does not support the electronics for the ATT protocol.  
</td>
<td>
[[image:vector_tube_data_center.jpg|200px]]
</td>
</tr>
</table>

===[[image:Check.jpg|25px]] New - Manual and Help File ===

The manual and help file was completely rewritten
<br>

===[[image:Check.jpg|25px]] New - Updated Interface ===

The user interface was updated.
<br>
<br>

==Other Pages==

*Back to the [[Benderlink]] page
*Back to the [[Benderlink for Addison]] page