View source for CNC Bender 10.0.6.0i - TCP-IP Error Detection System

==BETTER FEEDBACK - New TCP/IP Error Detection System==

In a healthy CNC Bender system, it is normal for TCP/IP errors to never build.

If TCP/IP errors begin to increase, then CNC Bender will warn the user every 60 seconds of this problem.

The operator can check to see if errors are accumulating by using the new Check Network Errors button in the Network Info menu:

The TCP/IP log is named TCPIP.log.  It can grow to 1 MB in size if errors continue until it is cleared with the Clear TCP/IP Log button in the Network Info menu.  After the log reaches 1 MB in size, older entries are removed in order to make room for newer entries.

[[Image:CNC_Bender_TCPIP_Error_Detection_System.jpg]]