View source for Custom Command

[[image:cncv12procontrol_withteachmode.jpg|300px]]

<table>

<tr valign=top>
<td width=300>
* Custom Commands store the moves learned during Teach Mode<br><br>
* A ''single'' Custom Command can contain any number of simultaneous [[Jog Motion]]s.<br><br> 
[[image:v12teachmode_buildcustomcommand.jpg|300px]]<br>
* In a SINGLE Custom Command, you could teach the bender how to combine any number of axes and actuators into one motion.<br><br>
* Every BEND stores up to 10 custom commands.  For example, a 5 bend part could have up to 60 additional Custom Commands. (10 in PreBend and 50 for the bends. The last bend's Custom Command is used for PostBend.)<br><br>
* Each Bend's Custom Command changes how the bender works after that bend when transitioning to the next bend.<br><br>
[[image:cncb12frb_customcommands_button.jpg|center]]<br><br>

*'''OVERVIEW of EDITING a CUSTOM COMMAND'''<br><br>
** Select the "Edit Custom" button of the bend's Custom Command you want to create or edit (See Screen 1)<br><br>
** Select one of the ten available Custom Commands (See Screen 2)<br><br>
** Setup the Custom Command selected in the Custom Command Editor (See Screen 3)<br><br>
** Exit to the FRB menu<br><br>
** Press AutoBuild<br><br>
** Run the bender<br><br>
<br><br>
* '''OTHER THINGS TO KNOW'''<br><br>
** Custom Commands can be MANUALLY entered and edited without the bender running in Teach Mode.<br><br>
** Or Custom Commands can be edited even ''after'' they were built using Teach Mode.<br><br>
** All Custom Commands are stored in the part file that contains the part data.

</td>


<td width=250>
<font size=4>Example actuators that could easily be put in a single Custom Command:</font>
<table>
<tr>
<td width=50></td>
<td width=200>Feed Axis</td>
</tr>
<tr>
<td width=50></td>
<td width=200>Rotate Axis</td>
</tr>
<tr>
<td width=50></td>
<td width=200>Vertical Radius Shift</td>
</tr>
<tr>
<td width=50></td>
<td width=200>Horizontal Radius Shift</td>
</tr>
<tr>
<td width=50></td>
<td width=200>Bend Axis</td>
</tr>
<tr>
<td width=50></td>
<td width=200>Mandrel Retract</td>
</tr>
<tr>
<td width=50></td>
<td width=200>and Kicker Advance</td>
</tr>
<tr>
<td width=50></td>
<td width=200>Mist</td>
</tr>
<tr>
<td width=50></td>
<td width=200>Any actuator</td>
</tr>
</table>
<br><br>

[[image:cncb12frb_customcommands.jpg|300px|thumb|Screen 1: Select one of the Edit Custom buttons a bend in the FRB page]]
[[image:cncv12_customcommands_list.jpg|300px|thumb|Screen 2: Custom Commands List Selection]]<br><br>
[[image:cncv12_customcommand_editor.jpg|300px|thumb|Screen 3: Custom Command Editor]]


</td>
</tr>


</table>


<br><br>

=Other Pages=
*Back to [[CNC Bender]]
*Back to [[CNC Bender Software Updates]]
*See [[CNC Bender General Information]]
*See [[Teach Mode]]
*See [[Jog Motion]]
*See upgrade [[CNC Bender v12-20100105]]