View source for Explain the Differences Between VTube-STEP and VTube-LASER

<table>
<tr cellpadding=10>
<td width=300>
[[image:vtube-laser_logo_1.96.png|300px]]<br><br><br>
[[image:vtube-step_logo_2.png|300px]]
* Back to [[VTube-LASER]]
* Back to [[VTube-STEP]]
</td>
<td width=300>
[[image:vtube-laser_1.89_mainscreen.png|300px]]<br>
[[image:vtube-step-1.89_screenimage.png|300px]]
</td>
</tr>
</table>

<br><br>


==VTube-STEP==
VTube-STEP allows you to import solid models, send new bender data to benders, and create reports with bender data. The price for VTube-STEP is $2750 per license*.  See [[VTube-STEP]].
<br><br>

==VTube-LASER==
VTube-LASER is built on top of VTube-STEP. It allows you to measure and qualify tube shapes and correct tube benders. The price for a VTube-LASER license is $11,500*. VTube-LASER was designed from the ground up to be the most powerful tube scanning package in the world. See [[VTube-LASER]].
<br><br>

==VTube-LASER Programmer==
VTube-LASER Programmer is also built on top of VTube-STEP. It is an offline version of VTube-LASER that can do everything that VTube-LASER can do except that it cannot connect to an arm to measure. The advantage of LASER PROGRAMMER compared to STEP for VTube-LASER project setup is that it can also set up measuring parameters at a remote location (VTube-STEP can only import and set the part shape). The current cost is $5750*. See [[VTube-LASER]].
<br><br>


*<b>The prices are current as of December 2021.  They are subject to change.</b>
<br><br><br>

==Other Pages==

*Back to the [[VTube-STEP]] page
*Back to the [[VTube-LASER]] page