View source for Seam Detection Logic

[[image:Seamdetect_application.jpg|300px|right]]
[[image:cncbender_logo.jpg|400px]]<br>


[[image:Seamdetect_diagram.jpg|500px|right]]

CNC Bender Seam Detect Logic uses a secondary process list that runs in parallel to the main process list in order to detect a seam.<br><br>

The diagram on the right shows the main process in the orange box on the left.  This is the actual bend program process.
<br><br>
The box on the right is the secondary process called SEAM_DETECT.  It causes the rotate axes to spin until the seam is located and the seam detect input is ACTIVE.  (This process can be modified for your application.)
<br><br>
When the seam is detected, then the SEAM_DETECT process STOPS RUNNING, causing the ROTATION JOG to also STOP.
<br><br>
Then the main process detects that the seam detect input is ACTIVE and  moves to the next step (See "3" in the orange box).<br>

----