View source for Use Bend Count For Machine Lube

''As of v1020070711 (July 11, 2007), this property is obsolete and no longer available.''

__toc__



===What is It?===
This property is a switch that instructs [[CNC Processor]] to use the bend count rather than the part count for machine lube start event.

===Value===
The value is set to 0 or 1 like this:

<pre>Use Bend Count For Machine Lube= 0</pre>

or 

<pre>Use Bend Count For Machine Lube= 1</pre>

If the value is set to 1, then it is activated, and [[Lube Machine At Bend Count]] property will be used to set the event for the machine lube.<br>
<br>
If the value is set to 0, then it is deactivated, and [[Lube Machine At Part Count]] property will be used to set the event for the machine lube.<br>


--[[User:Mcone|Mcone]] 23:40, 19 July 2006 (EDT)