Difference between revisions of "CNC Bender v11-20090408"
From ATTWiki
| Line 17: | Line 17: | ||
Now the Mandrel Early Advance is activated only if the MANDREL CYLINDER ENABLE is ON in the first bend row.<br><br> | Now the Mandrel Early Advance is activated only if the MANDREL CYLINDER ENABLE is ON in the first bend row.<br><br> | ||
| − | + | <br> | |
| − | <br> | + | |
| − | + | ||
[[image:prebendoptions_mandrelearlyadvance.jpg|400px]] | [[image:prebendoptions_mandrelearlyadvance.jpg|400px]] | ||
Revision as of 08:54, 8 April 2009
ENHANCED - Moved MANDREL CYLINDER ENABLE option from OVERALL to BEND Rows
This change allows the mandrel to be switched ON or OFF individually for any bend row rather than for every bend row.
This new feature is critical for mandrels in rectangular or square tubing that rotate 90 degrees, but the mandrel can only bend in one of the two planes.
CHANGE - To Mandrel Early Advance in Prebend Logic
Now the Mandrel Early Advance is activated only if the MANDREL CYLINDER ENABLE is ON in the first bend row.
Other Pages
- Back to CNC Bender
- Back to CNC Bender Software Updates
- Read about Push Bending
- Read about Push Bend Profile Tables
