• This feature allows you to automatically adjust ABSOLUTE FEED values transferred from other benders using different machine lengths.
  
  

• The menu allows you to change use or skip changes to EACH value presented.
  
  

• No value less than zero is allowed
  
  

• The feature uses the bender machine length that is embedded in each part file.
  
  

• The Push Bend Profile data is now SAVED INSIDE the part files, and LOADED with part files.
  
  

• This allows the data built up for a part to follow that part file when reloaded or transferred to other benders.
  
  

• The new FIXED RADIUS SIMPLE Push Bend type allows you to enter the actual values of travel for the feed, rotate, and bend arm axes.

• No special generation of the Feed axis movement is created like when the FIXED RADIUS - GENERATED. Whatever you enter is what is used.

• A new Push Bend Profile selection menu makes selecting Push Bend Profiles much easier and more powerful than the simple list used in previous versions.
  
  
• This allows CNC Bender to separate the different types of Push Bends into different lists for less confusion during choosing a profile for a bend.

The Push Bend Profiles are now selected from within the Push Bend Profile Setup menu. This makes selection much simpler and more powerful. It also allows for profiles to be added, edited, or added while you are adding them.

When entering the Push Bend Profile Setup menu this way, the Grid Mode is set to "Select Row".

If the Push Bend Profile Name already in the Bend Option exists in the Setup List, then the correct tab menu and profile will be selected for you when you enter the menu from Bend Options.

The Push Bend Profile Setup allows you to import profiles from other part files, export profiles, and clear profiles for starting new parts.

The PDA-RVG Profile Setup allows you to import profiles from other part files, export profiles, and clear profiles for starting new parts.

• Press the Profile button, and choose a NEW profile from any profile list.

• New indicators show which TYPE of profile is selected.
• [vr] = Variable Radius
• [fr] = Fixed Radius - Simple
• Yellow field = Fixed Radius - Generated

The keyboard is now automatically disabled in any menu that does not require keyboard input.



This prevents the "clicking" of any buttons or controls in CNC Bender software using the keyboard. The exceptions are:

• When CNC Bender is in the Low Level menu.
• When the CNC Bender numeric keypad is active.

• The Unit button now displays an image properly.
  
  

• The unit value in the sub menu does not change the unit in the main menus.