Difference between revisions of "AutoBuild"
From ATTWiki
| (One intermediate revision by one user not shown) | |||
| Line 5: | Line 5: | ||
<tr> | <tr> | ||
<td width=300> | <td width=300> | ||
| − | AutoBuild will convert the current bender setup into a list of commands for the [[CNC Processor] called a [[processlist]]. | + | AutoBuild will convert the current bender setup into a list of commands for the [[CNC Processor]] called a [[processlist]]. |
</td> | </td> | ||
<td> | <td> | ||
[[image:autobuild.jpg|400px]] | [[image:autobuild.jpg|400px]] | ||
</td> | </td> | ||
| − | </ | + | </tr> |
</table> | </table> | ||
Latest revision as of 23:05, 30 December 2009
|
AutoBuild will convert the current bender setup into a list of commands for the CNC Processor called a processlist. |
|
This is the middle of a sample processlist:
[DISPLAY] Next Step: (FRB Row 1) Close Pressure Die And Clamp, Home Boost Dies AllDiesClose = cto:6000 [DISPLAY] Completed: (FRB Row 1) Close Pressure Die And Clamp, Home Boost Dies [DISPLAY] Next Step: (FRB Row 1) Set Clamp Pressure To 0 % SetClampPressure = pwr0:0.00000000, cto:6000 [DISPLAY] Completed: (FRB Row 1) Set Clamp Pressure To 0 % [DISPLAY] Next Step: (FRB Row 1) Set PD Pressure To 0 % SetPDPressure = pwr0:0.00000000, cto:6000 [DISPLAY] Completed: (FRB Row 1) Set PD Pressure To 0 % [DISPLAY] Next Step: (FRB Row 1) Set Torque On Feed Axis To 15 % SetTorqueFeed = tqe0:15 [DISPLAY] Completed: (FRB Row 1) Set Torque On Feed Axis To 15 % [DISPLAY] Next Step: (FRB Row 1) Move Feed Axis +47.8779 MM Relative, and Move Bend Axis +90.0000 DEG Relative With Bottom Boost FeedBendBoost1 = pos2:47.87787204, vel2:35.09566238, ump2:1, adp2:3, pos3:90.00000000, vel3:63.33333333, ump3:1, cto:60000 [DISPLAY] Completed: (FRB Row 1) Move Feed Axis +47.8779 MM Relative, and Move Bend Axis +90.0000 DEG Relative With Bottom Boost [DISPLAY] Next Step: (FRB Row 1) Set Torque On Feed Axis To 90 % SetTorqueFeed = tqe0:90 [DISPLAY] Completed: (FRB Row 1) Set Torque On Feed Axis To 90 % [DISPLAY] Next Step: (FRB Row 1) Retract Mandrel MandrelRetract = cto:6000 [DISPLAY] Completed: (FRB Row 1) Retract Mandrel
