Difference between revisions of "CNC Processor"
From ATTWiki
| Line 1: | Line 1: | ||
| + | ===Motion=== | ||
The CNC Processor is software that runs invisibly behind CNC Bender. It is responsible for interpreting the current Process List, and then turning the commands, one line at a time, into action. | The CNC Processor is software that runs invisibly behind CNC Bender. It is responsible for interpreting the current Process List, and then turning the commands, one line at a time, into action. | ||
| − | So CNC Processor is the administrator of all the motion around the bender. It services the inputs, outputs, and servos around the bender. | + | ===TCP/IP Commands=== |
| + | So CNC Processor is the administrator of all the motion around the bender. It services the inputs, outputs, and servos around the bender. It does this be communicating through TCP/IP signals to each module through a device we call a [[Top Hat]]. | ||
| + | |||
| + | ===Offline=== | ||
| + | CNC Bender can be running without CNC Processor also running. In this state, we refer to CNC Bender as "CNC Bender Offline". | ||
| − | |||
--[[User:Mcone|Mcone]] 18:53, 29 June 2006 (EDT) | --[[User:Mcone|Mcone]] 18:53, 29 June 2006 (EDT) | ||
Revision as of 22:55, 29 June 2006
Motion
The CNC Processor is software that runs invisibly behind CNC Bender. It is responsible for interpreting the current Process List, and then turning the commands, one line at a time, into action.
TCP/IP Commands
So CNC Processor is the administrator of all the motion around the bender. It services the inputs, outputs, and servos around the bender. It does this be communicating through TCP/IP signals to each module through a device we call a Top Hat.
Offline
CNC Bender can be running without CNC Processor also running. In this state, we refer to CNC Bender as "CNC Bender Offline".
--Mcone 18:53, 29 June 2006 (EDT)
