Difference between revisions of "Master Power On"
From ATTWiki
| Line 1: | Line 1: | ||
Master Power On is the state in which all of the safety stops (E-stops) are cleared and the bender pump is switched on. | Master Power On is the state in which all of the safety stops (E-stops) are cleared and the bender pump is switched on. | ||
| − | To switch the Master Power on, clear all the E-stops and safety mechanisms, then press the Master Power On button. | + | To switch the Master Power on, clear all the E-stops and safety mechanisms, then press the Master Power On button. |
| + | |||
| + | In this state, the Master Power On button will illuminate green. | ||
If an E-stop, safety mat, or bend-arm safety plate is tripped, then the electronics in the bender will switch the Master Power OFF. | If an E-stop, safety mat, or bend-arm safety plate is tripped, then the electronics in the bender will switch the Master Power OFF. | ||
Revision as of 23:03, 29 June 2006
Master Power On is the state in which all of the safety stops (E-stops) are cleared and the bender pump is switched on.
To switch the Master Power on, clear all the E-stops and safety mechanisms, then press the Master Power On button.
In this state, the Master Power On button will illuminate green.
If an E-stop, safety mat, or bend-arm safety plate is tripped, then the electronics in the bender will switch the Master Power OFF.
--Mcone 19:02, 29 June 2006 (EDT)
