Revision as of 21:04, 16 December 2011

v12-20111215

CNC Processor can load and run an external program at the moment it changes part numbers in Auto mode.
A new option is in CNC Bender Low Level options list that is called "External File To Run When Part Changes In Processor". Enter the name of the external executable file and CNC Processor will run the program any time a new part number is run in Auto mode.

A new communications program can be run by the new feature described above.
The program loads into memory, loads the current part from the part log, sends the data to the Fanuc robot, then closes.
This method of sending data allows any software developer to create a program that can send data to other computers through networks whenever CNC Processor changes parts.

Several new PREBEND options allow for better control of the seam detect option in the Rotate Axis.
Added new COMDEF to set the seam detect rotate axis jog speed: Set Rotate Jog Speed.comdef
Added new HELP files to explain the new PREBEND seam detect options.
Added Sensor advance and retract COMDEFs (Seam Sensor

@@ Line 39: / Line 39: @@
 * The program loads into memory, loads the current part from the part log, sends the data to the Fanuc robot, then closes.<br><br>
 * This method of sending data allows any software developer to create a program that can send data to other computers through networks whenever CNC Processor changes parts.
+</td>
+<td width=300>
+</td>
+</tr>
+</table>
+===[[image:Check.jpg|25px]] NEW - Seam Find Detection Logic  ===
+[[image:ge-fanuc_communications.jpg|500px]]
+<table cellpadding=10>
+<tr valign=top>
+<td width=400>
+* Several new PREBEND options allow for better control of the seam detect option in the Rotate Axis.<br><br>
+* Added new COMDEF to set the seam detect rotate axis jog speed: ''Set Rotate Jog Speed.comdef''<br><br>
+* Added new HELP files to explain the new PREBEND seam detect options.
+* Added Sensor advance and retract COMDEFs (Seam Sensor
 </td>