v12-20111222

• Back to CNC Bender Software Updates

• Servo-controlled pressure die positioning is much more accurate and the motion is smoother.
  
  
• This feature is especially useful for extreme accuracy during part capture. Parts can be accurately captured by the pressure die during PREBEND (Load), BENDING, and POSTBENDING (Unloading).
  
  

PreBend Options: PD Load Capture Position

• This feature allows you to move the pressure die to a position close to the bend die for load-capture.

Overall Options: PD Jog Position After Bends

• This feature allows you to open the pressure die slightly after a bend to relieve pressure before a mandrel pull.

Bending Options: PD Servo Retract Position

• This feature allows you to partially retract the pressure die during Multi-Bending and immediately after a bend.

PostBending Options: PD Unload Capture Position

• This feature allows you to partially retract the pressure die immediately after the last bend for unloading.

• A new Low Level PD Mode option allows the Pressure Die to be treated as a standard output actuator or a servo axis.
  
  

• Pressure Die COMDEFs were added:
  • PD Servo Absolute
  • PD Servo Incremental Positive
  • PD Servo And Clamp Output And PDA Output Home
  • PD Servo Absolute And PDA Output Home
  • PD Servo Absolute And Clamp Output Home
  • PD Servo Find Home
  • PD Servo Reset Position
  • PD Servo Absolute and PDA Servo Absolute
  • PD Servo Absolute And PDA Output Home

• New help files were added:
  • Option_PrebendSeamDetectDegreesPerSecond.rtf
  • Option_PrebendSeamDetectFeedAbsoluteSpeed.rtf
  • Option_PrebendSeamDetectFeedAbsolutePosition.rtf
  • ExternalFileToRunWhenPartChangesInProcessor.rtf
    
    

• This help file was updated:
  • Option_PrebendSeamDetectMode.rtf