Difference between revisions of "Lube Machine At Bend Count"
From ATTWiki
(→Calculating the Value) |
|||
| Line 25: | Line 25: | ||
Lube 3 times per shift, then... | Lube 3 times per shift, then... | ||
4000 / 3 (times) = 1333 bends (out and back) | 4000 / 3 (times) = 1333 bends (out and back) | ||
| + | |||
| + | Lube Machine At Bend Count= 1333 | ||
</pre> | </pre> | ||
Revision as of 03:56, 20 July 2006
Contents |
What is It?
This property is a bend count that instructs CNC Processor to enable the machine lube event when the bend count reaches a preset value.
Value
The value is set from 1 to any value greater than 1 like this:
Lube Machine At Bend Count= 4000
The value of 4000 in this example represents 4000 motions of the bend arm. Therefore, the machine would be lubed about every 2000 bends using the 4000 count.
Calculating the Value
- Estimate the number of bends you may produce in a shift
- Multiply the number of bends X 2
- Determine how many times you want to lube the machine during a shift.
- Divide the ( Bends X 2 ) with the number of machine lubes you would like per shift
2000 bends per shift 2000 x 2 = 4000 Lube 3 times per shift, then... 4000 / 3 (times) = 1333 bends (out and back) Lube Machine At Bend Count= 1333
--Mcone 23:40, 19 July 2006 (EDT)
