Difference between revisions of "Benderlink for SolidWorks"
| Line 2: | Line 2: | ||
http://advancedtubular.com/blink_sw/help_html/clip0003.jpg | http://advancedtubular.com/blink_sw/help_html/clip0003.jpg | ||
| + | |||
| + | |||
| + | ===Features=== | ||
| + | The main features of this software: | ||
| + | |||
| + | 1 - Read tube data from Solid Works | ||
| + | 2 - Convert the tube data to bender data | ||
| + | 3 - Save / Recall the bender data | ||
| + | 4 - Send new nominal data to benders that support [[SVNET]] protocol. | ||
| + | 5 - Make and send correction data to benders that support the [[SVNET]] protocol. | ||
| + | |||
| + | The correction feature is peformed by measuring a tube with ROMER / FARO arm, using this data to create a tube centerline in Solid Works, then allow Benderlink to compare this inspected data with the MASTER data. | ||
| + | |||
[http://advancedtubular.com/blink_sw/help_html/] Read the online help | [http://advancedtubular.com/blink_sw/help_html/] Read the online help | ||
Revision as of 17:45, 28 July 2006
Benderlink for Solid Works software is designed to connect Solid Works workstations to SVNET-based benders. This software also performs data conversion.
http://advancedtubular.com/blink_sw/help_html/clip0003.jpg
Features
The main features of this software:
1 - Read tube data from Solid Works 2 - Convert the tube data to bender data 3 - Save / Recall the bender data 4 - Send new nominal data to benders that support SVNET protocol. 5 - Make and send correction data to benders that support the SVNET protocol.
The correction feature is peformed by measuring a tube with ROMER / FARO arm, using this data to create a tube centerline in Solid Works, then allow Benderlink to compare this inspected data with the MASTER data.
[1] Read the online help
--Mcone 13:37, 28 July 2006 (EDT)
